Help keep body roll in check through turns with the Delphi TC6025 front sway bar link, a direct-fit replacement for the 2006-2011 Chevrolet HHR, 2005-2009 Chevrolet Cobalt and 2005-2006 Pontiac Pursuit.
Also known as a stabilizer bar link, this part connects the sway bar to the suspension so the bar can resist body lean in corners. Delphi's OE safety technology is fitted to millions of vehicles worldwide, and Delphi brings that OE expertise to its aftermarket steering portfolio. Its dimensional and material analysis is aimed at close compatibility between the original part and this aftermarket one.
- Tested to the extreme: tested at temperatures below -40°C and above 120°C, exposed to 720 hours of salt spray, and fatigue tested.
- Ultrasonic molding: made with ultrasonic molding to help prevent future weld breakage.
- Micron-tolerance machining: machined to micron tolerances for durability and smooth joint operation.
- Anti-corrosion protection: applied to each part to help prevent corrosion and give it a clean appearance.
A sway bar link may need replacing if you notice a clunk or rattle from the front suspension over bumps, more body lean in turns, or a loose feel. If a worn link is the cause, this Delphi link replaces it. Replacing the links on both sides together is commonly recommended.
Interchange: 606.62027
60662027 · SL90225 · SL90225XL · 15787554 · 20784688 · 22708767 · K750012 · GS50800 · MS50800 · JTS669
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
606.62027, SL90225, SL90225XL, 15787554, 20784688, 22708767, K750012, GS50800, MS50800, JTS669
Frequently Asked Questions
Will this 2006-2011 Chevrolet HHR sway bar link also fit a 2005-2009 Chevrolet Cobalt or 2005-2006 Pontiac Pursuit?
Yes. The Delphi TC6025 is listed for the 2006-2011 Chevrolet HHR, 2005-2009 Chevrolet Cobalt and 2005-2006 Pontiac Pursuit. Check the "Vehicles it fits" section for full fitment details.
What does a sway bar link do?
It connects the sway bar to the suspension so the bar can resist body lean when cornering. This Delphi link is cataloged for the front position.
How is the Delphi TC6025 tested?
Delphi tests these links at temperatures below -40°C and above 120°C and exposes them to 720 hours of salt spray. Delphi also fatigue tests its sway bar links.
What are signs a sway bar link may need replacing?
Common signs include a clunk or rattle over bumps, more body lean in turns, or a loose feel. Other parts can cause these symptoms, so diagnose the cause before replacing.
Should I replace both front links at once?
Replacing the links on both sides together is commonly recommended. Consult the vehicle service information for installation steps and torque specifications.
