Delphi TC7357 rear sway bar link for the 2008-2015 Mitsubishi Lancer connects the rear sway bar to the suspension to help limit body roll. This link, also called a stabilizer bar link, replaces a worn one at the back of the car.
- Ultrasonic molding to help prevent future weld breakage
- Fatigue testing to avoid failure
- Machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each part
- Tested at temperatures below -40 degrees C and over 120 degrees C
Quick facts
- Part: Delphi TC7357 sway bar link
- Also called: stabilizer bar link
- Fits: 2008-2015 Mitsubishi Lancer
- Position: Rear
A worn link can show up as a clunk or rattle over bumps, or as looser handling in turns. A rear clunk alone does not prove the link is the problem, since a worn shock mount or suspension bushing can make a similar noise. Rear sway bar links are normally replaced as a pair, and this listing is one link.
Fits
This sway bar link is a direct-fit replacement for the 2008-2015 Mitsubishi Lancer.
Specifications
- Position: Rear
- Quantity per vehicle: 2
- Corrosion protection: anti-corrosion protection applied to each part
In the box
One sway bar link. The 2008-2015 Mitsubishi Lancer takes two.
Interchange: 1018177 · SL68545 · SL68545PR · K750568 · MS80853 · 4156A031 · JTS1530
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
1018177, SL68545, SL68545PR, K750568, MS80853, 4156A031, JTS1530
Frequently Asked Questions
Is the Delphi TC7357 a stabilizer link for the 2008-2015 Mitsubishi Lancer?
Yes. Delphi TC7357 is a rear sway bar link that fits the 2008-2015 Mitsubishi Lancer.
How is the Delphi TC7357 protected against rust?
Anti-corrosion protection is applied to each Delphi TC7357 link. The part is also exposed to 720 hours of salt spray in testing.
What can a clunk over rear bumps mean for a sway bar link?
A worn link can clunk or rattle over bumps or feel loose in turns. A shop can check the joint for play.
Does the Delphi TC7357 replace number K750568?
Yes. K750568 is one of the other numbers this link replaces, and the rest are on the Interchange line of this page.
How does ultrasonic molding help the Delphi TC7357?
Ultrasonic molding is used to help prevent future weld breakage in the link. The links are also fatigue tested to avoid failure.
