Keep fuel moving from the tank to the engine at steady pressure, with less pump noise, using the DENSO Auto Parts Electric Fuel Pump 951-0018. It is a direct-fit replacement for the 2005-2010 Honda Odyssey with the V6-3.5L and the 2006-2009 Honda S2000 with the L4-2.2L.
This 12-volt DC internal pump draws fuel from the tank and sends it under pressure to the fuel system. DENSO builds it with these features:
- Quieter operation: a balanced armature and turbine technology help reduce pump noise.
- Pressure control: check and relief valves are designed to keep fuel pressure stable.
- Clean electrical performance: EMI choke coils help limit electrical interference, and durable brushes support efficient fuel delivery.
- Specifications: 12 V DC, negative ground, one outlet, 11 mm inlet outside diameter, specific-fit design.
What's in the box: the pump with mounting hardware. The gasket or seal, seal and lock ring, strainer, regulator and mounting bracket are not included. Transfer or replace those parts as directed by the vehicle service procedure.
Signs a fuel pump may need replacing: hard starting or a no-start, sputtering or hesitation under load, stalling, or a loud whine from the fuel tank. These symptoms can have other causes, so diagnose the fuel system before replacing the pump.
Quantity per application: 1. Country of origin: Japan.
This part cross-references / interchanges with the following part numbers:
69544, 17040-S2A-A50, 17045-SHJ-A30
Frequently Asked Questions
Does the DENSO 951-0018 fit a 2008 Honda Odyssey?
Yes. It is listed as a direct-fit replacement for the 2005-2010 Honda Odyssey with the V6-3.5L engine. Check the "Vehicles it fits" section to confirm your vehicle.
What does an electric fuel pump do?
It draws fuel from the tank and delivers it under pressure to the fuel system. This DENSO pump uses check and relief valves designed to keep that pressure stable.
What is included with the 951-0018?
It comes with mounting hardware. The gasket or seal, seal and lock ring, strainer, regulator and mounting bracket are not included.
What are the specifications of this fuel pump?
It is an internal 12 V DC, negative-ground pump with one outlet and an 11 mm inlet outside diameter. It was made in Japan.
What are signs a fuel pump may need replacing?
Signs include hard starting or a no-start, sputtering under load, stalling, or a loud whine from the tank. Other faults can cause these symptoms, so diagnose the fuel system first.
