DENSO Auto Parts Oxygen Sensor P/N:234-4489
DENSO 234-4935 oxygen sensor for the 2013-2018 Volkswagen Jetta 4-cylinder 2.0L, the 2014-2018 Jetta 4-cylinder 1.8L and other vehicles measures the oxygen in the exhaust and sends the reading to the engine computer. It is a heated, narrow-band sensor for the downstream position.
A failing oxygen sensor can show up as a check engine light or poor fuel economy. An exhaust leak, a worn catalytic converter or damaged wiring can be behind those signs too, so find the cause before buying a sensor.
Beyond the Jetta, it is a direct-fit replacement for a wide range of Volkswagen and Audi models, including the 2014-2017 Volkswagen Passat 4-cylinder 1.8L and the 2018-2022 Passat 4-cylinder 2.0L. It is also an oxygen sensor for the 2013-2019 Volkswagen Beetle 4-cylinder 2.0L and the 2014-2017 Beetle 4-cylinder 1.8L. This listing is one sensor, and the downstream position takes one per vehicle.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this one of the VW Jetta oxygen sensors that fits the 2013-2018 Volkswagen Jetta 4-cylinder 2.0L?
Yes. DENSO 234-4935 fits the 2013-2018 Volkswagen Jetta 4-cylinder 2.0L and the 2014-2018 Jetta 4-cylinder 1.8L in the downstream position. If your car is not named here, look it up in the "Vehicles it fits" section.
Will a Passat oxygen sensor like this fit the 2014-2017 Volkswagen Passat 4-cylinder 1.8L?
Yes. DENSO 234-4935 fits the 2014-2017 Volkswagen Passat 4-cylinder 1.8L and the 2018-2022 Passat 4-cylinder 2.0L, one sensor per car in the downstream position.
How long is the wire on this DENSO downstream oxygen sensor?
The wire length is 29.13 in, and the sensor has 4 wires with a male connector. The threaded body has a 0.708 in thread diameter.
What can a failing downstream oxygen sensor cause?
A check engine light or poor fuel economy can be signs of a failing sensor. A shop can read the codes and test the sensor to confirm.
What does the aluminum oxide trap layer in this DENSO sensor do?
DENSO's aluminum oxide trap layer protects the ceramic element from silicone and lead poisoning. The stainless housing is laser-welded to resist corrosion, and a PTFE filter blocks contaminants.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.