PowerStop L5176 rear right brake caliper for the 2009-2011 Dodge Journey clamps the pads against the rotor to slow the wheel. This Autospecialty by PowerStop brake caliper is a floating, single-piston design that bolts on in place of the original stock caliper.
- Autospecialty by PowerStop line of replacement brake calipers
- New seals, guide pins, dust boots, bleeder screw and stainless-steel abutment hardware clips
- Integrated mechanical parking brake
- High temperature EPDM rubber dust boots
- Assembly lubricant for smooth caliper operation
- 100% pressure tested and inspected
Quick facts
- Part: PowerStop L5176 brake caliper
- Also called: disc brake caliper
- Fits: 2009-2011 and 2013 Dodge Journey
- Position: Rear right
- Material: Cast iron caliper casting, steel piston
- Condition: New
A failing caliper can show up as the car pulling to one side, uneven pad wear, brake fluid at the wheel or a parking brake that does not hold. Before you replace the disc brake caliper, rule out worn pads, sticking slide pins and a damaged brake hose, because those can produce pulling and drag too.
Fits
This is a caliper for the rear right of the 2009-2011 and 2013 Dodge Journey.
Specifications
Fit and size
- Position: Rear right
- Quantity per vehicle: 1 for this position
- Piston quantity: 1
- Piston diameter: 42.67 mm
- Bleeder screw quantity: 1
Build and materials
- Caliper type: Floating
- Caliper casting material: Cast iron
- Piston material: Steel
- Parking brake: Integrated, mechanical
- Dust boots: High temperature EPDM rubber
- Caliper slides: Included
- Condition: New
- Country of origin: China
In the box
One caliper with new seals, guide pins, dust boots, a bleeder screw and stainless-steel abutment hardware clips. The mounting bracket, mounting bolts, brake pads, caliper grease and pad wear sensor are not included, and the old mounting bolts may not be reusable, so plan on new ones. This listing is one caliper for the rear right, and that position takes one; the rear left is a separate part ordered on its own, and the two sides are normally replaced together.
Frequently Asked Questions
Does PowerStop L5176 fit the 2013 Dodge Journey?
Yes. PowerStop L5176 is a rear right caliper for the 2013 Dodge Journey, and it also fits the 2009-2011 Dodge Journey.
Does the PowerStop L5176 caliper come with the mounting bracket?
No. The mounting bracket, mounting bolts, brake pads and caliper grease are not included. PowerStop L5176 does come with new seals, guide pins, dust boots, a bleeder screw and stainless-steel abutment hardware clips.
What size piston does this floating rear caliper have?
This rear right caliper has a single steel piston, 42.67 mm in diameter. The caliper body is cast iron.
Can a parking brake that won't hold come from a rear caliper like this one?
It can. This caliper has an integrated mechanical parking brake, so a worn one may show up as a weak hold, along with pulling or fluid at the wheel. A shop can confirm the cause.
Does this PowerStop caliper bolt on without modifications?
Yes. PowerStop L5176 bolts on in place of the original stock caliper with no modifications necessary, and the caliper slides are included.
