The ADVICS AD0242 front brake pad for the 1983-1986 Toyota Camry and other vehicles uses ceramic friction material for quiet, low-dust braking. It is an ADVICS brake pad from the Ultra-Premium Ceramic line, designed and tested under original equipment specifications.
- Ceramic friction material for consistent braking
- Quiet, smooth, low-dust operation
- Multi-layer, adhesive-backed shims made to OE specifications or better, to keep noise and vibration down
- Organic formula for longer pad and rotor life
- Fine blank steel backing plate with the friction material integrally molded
- Mechanical pad wear sensor included
Squealing, grinding or a longer stopping distance can mean worn front pads. A sticking caliper or worn rotors can cause similar signs, so pin down the actual cause before you buy.
This pad also fits the 1984-1992 Toyota Corolla and the 1992-1999 Toyota Paseo, along with many other Toyota, Chevrolet and Geo models. If your car isn't one of these, run its year and model through the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 1 set (4 pads)
- Pad height: 47.5 mm
- Pad width: 104.14 mm
- Pad thickness: 15 mm
Build and materials
- Friction material: Ceramic
- Attachment: Integrally molded
- Backing: Fine blank steel
- Shims: Multi-layer, adhesive-backed, included
- Pad wear sensor: Mechanical, included
- Country of origin: Japan
In the box
One set of four pads with pad shims and a mechanical pad wear sensor. Mounting hardware, abutment clips and brake lubricant are not included. The vehicle takes one set.
Interchange / FMSI:
FMSI: 7153-D242
Frequently Asked Questions
Is this the right Toyota Camry brake pad for a 1983-1986 car?
Yes, ADVICS AD0242 is a front brake pad that fits the 1983-1986 Toyota Camry. If your car is a different year or model, look it up in the "Vehicles it fits" section.
Is this the right Toyota Corolla brake pad for changing brake pads on a 1984-1992 model?
Yes, ADVICS AD0242 fits the 1984-1992 Toyota Corolla. Mounting hardware and abutment clips are not included, so have those ready when you change the pads.
What comes with the ADVICS AD0242 pads?
One set of four ceramic pads with pad shims and a mechanical pad wear sensor. Mounting hardware, abutment clips and brake lubricant are not included, and the vehicle takes one set.
What is the friction material on this disc brake pad set?
The friction material is ceramic, integrally molded to a fine blank steel backing. Pad thickness is 15 mm, and the shims are multi-layer with an adhesive backing.
How can I tell when these front brake pads are wearing out?
Squealing, grinding or a longer stopping distance can mean the pads are worn. A brake shop can inspect how much friction material is left on these front pads.
