Beck/Arnley Disc Brake Pad Set 085-1894 - view 2

Beck/Arnley Disc Brake Pad Set 085-1894 - view 3

Beck/Arnley Disc Brake Pad Set 085-1894 - view 4

Beck/Arnley Disc Brake Pad Set 085-1894 - view 5

Beck/Arnley Disc Brake Pad Set P/N:085-1894

Be the first to review this product

$32.99

MPN: 085-1894

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Beck/Arnley Disc Brake Pad Set P/N:085-1894

$32.99

Description

Refresh your rear stopping power with the Beck/Arnley brake pad set, part number 085-1894 — a direct-fit rear disc brake pad set for the 2009-2016 Toyota Venza. Beck/Arnley sources this pad set to serve as a direct replacement for the original-equipment application, with attention given to form, fit, and function for foreign-nameplate vehicles.

OE-matched friction: made with the same pad material type that originally came on the vehicle (ceramic, semi-metallic, or NAO).
Precision-cut edges: machined for a proper fit in the caliper.
Bonded shims: help reduce braking noise.
Post-cured: ready to install with no separate break-in procedure.

This is an application-specific set for the rear axle of the listed Venza years. If worn rear pads are behind your squealing, reduced braking, or a low-pad warning, this set replaces them — inspect the rotors and hardware during the job, and replace both sides together for even, balanced braking. See the Buyer's Guide tab for engine-level fitment.

Interchange: ACT1402 · 10514020 · D81402SC · 161402 · PGD1402C · 044660T010 · D1402 · QC1402

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

This part cross-references / interchanges with the following part numbers:

ACT1402, 10514020, D81402SC, 161402, PGD1402C, 044660T010, D1402, QC1402

Frequently Asked Questions

What vehicle does the Beck/Arnley brake pad set 085-1894 fit?

It is a direct-fit rear disc brake pad set for the 2009-2016 Toyota Venza. Check the Buyer's Guide tab to confirm the engine-level fitment for your vehicle.

What friction material are these pads made from?

They are made with the same pad material type that originally came on the vehicle — ceramic, semi-metallic, or NAO depending on the application.

Do these pads require a break-in procedure?

No. The pads are post-cured, which eliminates the need for a separate break-in after installation.

Do the shims help with brake noise?

Yes. The bonded shims are designed to help reduce braking noise. Precision-cut edges also support a proper fit in the caliper.

Should I replace both sides at the same time?

Yes. This set covers the rear axle, and replacing both sides together helps promote even, balanced braking. Inspect the rotors and hardware during the job.