Bosch 50011234 rear brake rotor for the 2001-2003 Toyota Highlander and other vehicles is the disc the rear pads clamp to slow the wheel. This Bosch brake rotor, also called a disc brake rotor, is a solid iron-alloy rotor, and the hub assembly is not included.
- 100% precision balanced for smooth operation and low vibration
- Tight tolerances with low run-out and DTV specifications for a smooth pedal feel with no pulsation
- Heat flowed castings for consistent wear, quiet operation and long life
- Full coating protects against corrosion
- ABS sensor rings for trouble-free ABS and traction control operation on equipped vehicles
Quick facts
- Part: Bosch 50011234 brake rotor
- Also called: disc brake rotor
- Fits: 2001-2003 Toyota Highlander and other vehicles
- Position: Rear
- Material: Iron alloy
- Condition: New
Pedal pulsation, grinding or deep grooves on the rotor face can mean the rotor is worn, though worn pads or a sticking caliper can produce similar symptoms, so find out what is behind them before you buy. During a brake service with the wheel off, compare the measured thickness with the discard specification engraved on the rotor edge.
Fits
This rotor is listed for a wide range of Toyota and Lexus models, led by the 2001-2003 Toyota Highlander, the 1992-1996 Toyota Camry V6-3.0L and the 1999-2003 Lexus RX300. These cars take two rotors on the rear axle. This listing is one rotor, so the other side of that axle needs its own, and the pair is normally replaced together. If your car is not named here, find it in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
- Center bore diameter: 62.2 mm
- Thickness: 10 mm
Build and materials
- Construction: Solid
- Material: Iron alloy
- Coating: Geomet
- ABS sensor ring: for trouble-free ABS and traction control operation on equipped vehicles
- Hub assembly: not included
- Condition: New
In the box
One rear brake rotor; the hub assembly is not included.
Interchange: 4243133030
Frequently Asked Questions
Does this Toyota Camry brake rotor fit a 1992-1996 Camry with the V6-3.0L engine?
Yes. Bosch 50011234 is a rear rotor listed for the 1992-1996 Toyota Camry V6-3.0L. If your car is another model, look it up in the "Vehicles it fits" section.
Will this Toyota Highlander brake rotor work on a 2001-2003 Highlander?
Yes. This rear rotor is listed for the 2001-2003 Toyota Highlander.
Are Bosch QuietCast rotors like this rear one solid or vented?
This one is solid. Bosch 50011234 has solid construction, a 10 mm thickness and a 62.2 mm center bore.
How do I know when this rear rotor has reached its discard thickness?
The rotor edge carries an engraved code that includes its identification and discard specification. Measure the thickness during a brake service and compare it with that figure; a shop can do the measuring.
Does this Bosch QuietCast brake rotor come with the wheel hub?
No. The hub assembly is not part of this listing, which is one rear rotor. The ABS sensor rings are for ABS and traction control operation on equipped vehicles.
