Front Brake Rotor for 2017-2024 Nissan Titan & More - PowerStop JBR1199EVC

$126.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: JBR1199EVC
    UPC: 889906301882
    Condition: New
    Weight: 27.60 LBS
    Item Package Quantity: 1
    $126.99
    Adding to cart… The item has been added

    Have questions?

    PowerStop Disc Brake Rotor P/N:JBR1199EVC
    PowerStop Disc Brake Rotor P/N:JBR1199EVC
    $126.99
    $126.99

    PowerStop JBR1199EVC front brake rotor for the 2017-2024 Nissan Titan and other vehicles gives the pads a surface to clamp against. This vented disc brake rotor is full cast with a smooth surface.

    • PowerStop Evolution Coated rotors are fully coated with Genuine GEOMET 360 against rust and corrosion
    • Bolt-on design that needs no modifications
    • DTV and runout held to strict tolerances for smooth, quiet braking
    • 100% dynamic mill balanced

    Quick facts

    • Part: PowerStop JBR1199EVC brake rotor
    • Also called: disc brake rotor
    • Fits: 2017-2024 Nissan Titan and other vehicles
    • Position: Front
    • Condition: New

    Pedal pulsation, shake through the steering wheel under braking, deep grooves or a thickness below the discard figure can mean a rotor is worn. Before you replace it, rule out worn pads, a sticking caliper or a worn wheel bearing as the source of the pulsation or shake. Change the front rotors on both sides of the axle together; this listing is one rotor, and the front axle takes one per side.

    Fits

    It also fits the 2008-2015 Nissan Titan, the 2007-2015 Nissan Armada and the 2008-2010 Infiniti QX56. It is a direct bolt-on replacement with original equipment fit and function, and its weight and vane count match the original design.

    Specifications

    Fit and size

    • Position: Front
    • Quantity per vehicle: 2
    • Outside diameter: 350 mm (13.78 in)
    • Overall height: 43.10 mm (1.70 in)
    • Nominal thickness: 30.00 mm (1.18 in)
    • Discard thickness: 28.50 mm (1.12 in)
    • Bolt circle: 139.70 mm (5.50 in), 6 lug holes

    Build and materials

    • Construction: Vented, full cast
    • Surface: Smooth
    • Coating: Rust-resistant, Genuine GEOMET 360
    • ABS tone ring: not included
    • Balance: 100% dynamic mill balanced
    • Condition: New
    • Country of origin: China

    Frequently Asked Questions

    Is this a brake rotor for the 2007-2015 Nissan Armada?

    Yes. PowerStop JBR1199EVC is a front rotor for the 2007-2015 Nissan Armada, with one rotor on each side of the axle.

    Is this PowerStop brake rotor vented or solid?

    This PowerStop JBR1199EVC rotor is vented, with a full-cast body and a smooth surface. Its outside diameter is 350 mm (13.78 in).

    What discard thickness applies to these PowerStop front rotors?

    The discard thickness is 28.50 mm (1.12 in). Measure it during a brake service with the wheel off; a rotor at or below that figure should be replaced.

    How is this rotor protected against rust?

    This PowerStop JBR1199EVC rotor is fully coated with Genuine GEOMET 360, a thin layer that protects against rust and corrosion without influencing braking performance.

    Is an ABS tone ring included with PowerStop JBR1199EVC?

    No. The ABS tone ring is not included with this rotor, and this listing is one rotor.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review