PowerStop EBR1221EVC rear brake rotor for the 2016-2019 BMW Alpina B6 xDrive Gran Coupe and other vehicles gives the brake pads a smooth, vented surface to clamp against. This PowerStop brake rotor turns the pads' clamping force into the friction that slows the wheel.
- PowerStop Evolution Coated rotors wear a full coat of Genuine GEOMET 360 against rust and corrosion
- The thin GEOMET 360 layer does not influence braking performance
- Strict tolerances for DTV and runout for smooth, quiet performance
- 100% dynamic mill balanced
Quick facts
- Part: PowerStop EBR1221EVC brake rotor
- Also called: disc brake rotor
- Fits: 2016-2019 BMW Alpina B6 xDrive Gran Coupe and other vehicles
- Position: Rear
- Condition: New
A pulsing brake pedal, grinding or deep grooves in the rotor face can mean a rotor is worn. Before you replace it, rule out sticking calipers and worn pads, since either can produce similar symptoms. Replace the rear rotors as a pair, left and right; this listing is a single rotor.
Fits
This rotor is listed for a wide range of BMW models, including the 2010-2017 BMW 550i GT xDrive and the 2010-2015 BMW 550i GT. Two rotors go on the rear axle, one per side. It is a direct bolt-on replacement, and its weight and vane count match the original equipment design. If your BMW isn't named here, find its model and years in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
- Outside diameter: 370 mm (14.57 in)
- Bolt circle: 120 mm (4.72 in), 5 lug holes
- Nominal thickness: 23.80 mm (0.94 in)
- Discard thickness: 22.40 mm (0.88 in)
- Overall height: 69 mm (2.72 in)
Build and materials
- Type: Vented, full cast
- Surface: Smooth
- Coating: Genuine GEOMET 360, rust resistant
- Balance: 100% dynamic mill balanced
- ABS tone ring: not included
- Condition: New
- Country of origin: China
Frequently Asked Questions
Does the PowerStop EBR1221EVC rear rotor fit the 2016-2019 BMW Alpina B6 xDrive Gran Coupe?
Yes. PowerStop EBR1221EVC is listed for the 2016-2019 BMW Alpina B6 xDrive Gran Coupe, and this car takes two rear rotors, one per side.
What is the minimum thickness for the PowerStop EBR1221EVC rotor?
The PowerStop EBR1221EVC has a discard thickness of 22.40 mm (0.88 in) and measures 23.80 mm (0.94 in) when new. A rotor worn to the discard size is due for replacement.
What coating does this PowerStop rear rotor have?
This rotor is fully coated with Genuine GEOMET 360, a thin layer that protects against rust and corrosion without influencing braking performance.
Does this rear rotor come with an ABS tone ring?
No. The ABS tone ring is not included with this rotor.
How can I tell if my rear disc brake rotor is worn?
During a brake service, look for deep grooves, cracks or rust on the face, or measure thickness against the 22.40 mm discard size. A pulsing pedal or grinding noise while braking are other signs you may notice.
