PowerStop AR8582XPR rear brake rotor set for the 1999-2003 Ford F-150 and other vehicles replaces the stock rotors with drilled and slotted ones. This PowerStop brake rotor pair is a bolt-on upgrade for stock brakes and needs no modifications.
- Evolution Performance line: drilled, slotted and zinc-plated rotor pair
- Cross-drilled for brake cooling, with chamfered holes and rounded slots to minimize stress cracking
- Slotted friction surface sweeps away gases, dust and water to keep the contact patch clean
- Silver zinc dichromate plating resists rust and corrosion
- Strict tolerances for DTV and runout, and 100% dynamic mill balanced
Quick facts
- Part: PowerStop AR8582XPR brake rotor set
- Also called: disc brake rotor set
- Fits: 1999-2003 Ford F-150 and other vehicles
- Position: Rear
- Condition: New
A worn disc brake rotor set can show up as a pulsing pedal, grooves or cracks on the rotor face, or a thickness at the discard size. Pads, calipers or other brake parts can produce similar symptoms, so measure the rotor against the discard thickness below, engine off, during a brake service before replacing anything.
Fits
This rear rotor pair goes on the 1999-2003 Ford F-150, the 2000-2002 Ford Expedition and the 2004 Ford F-150 Heritage, plus other vehicles. If your vehicle is not one of those, open the "Vehicles it fits" section to check your exact model and engine. This listing is a pair, one rotor for each rear wheel of a 2000-2002 Ford Expedition, and rotors on one axle are normally replaced together.
Specifications
Fit and size
- Position: Rear
- Sold as a pair
- Outside diameter: 334 mm (13.15 in)
- Bolt circle: 135 mm (5.31 in), 5 lug holes
- Nominal thickness: 15.00 mm (0.59 in)
- Discard thickness: 12.00 mm (0.47 in)
- Overall height: 57.20 mm (2.25 in)
Build and materials
- Type: solid, full cast
- Surface: slotted and drilled
- Coating: silver zinc dichromate plating
- ABS tone ring: not included
- Condition: New
- Country of origin: China
In the box
One pair of rotors.
Frequently Asked Questions
Will these F-150 brake rotors work on the rear of a 1999-2003 Ford F-150?
Yes. PowerStop AR8582XPR is a rear rotor set for the 1999-2003 Ford F-150, and it bolts on without modifications.
Are these Expedition brake rotors right for the 2000-2002 Ford Expedition?
Yes. This rear pair fits the 2000-2002 Ford Expedition, with 5 lug holes on a 135 mm bolt circle.
Do PowerStop slotted rotors in this set also have drilled holes?
Yes. The surface is both slotted and cross-drilled, and the rotor is a solid, full-cast design rather than a vented one.
At what thickness do these rotors need replacing?
This rear rotor has a discard thickness of 12.00 mm (0.47 in). A new one measures 15.00 mm (0.59 in), so measure it against those two numbers.
Does the AR8582XPR rotor set come with an ABS tone ring?
No. The ABS tone ring is not included. PowerStop AR8582XPR is a pair of rotors only.
