Hold bumper covers, grilles and interior trim firmly in place with the Dorman - Autograde bumper cover retainer, part number 700-049, a multi-purpose drive-type rivet that does the same job as the original equipment retainer. It fits many GM vehicles, among them the 2007-2013 Chevrolet Silverado 1500, 2010-2018 Chevrolet Equinox and 2007-2014 Chevrolet Silverado 2500. See the "Vehicles it fits" section for the full list.
This one retainer is listed under several names: Bumper Cover Retainer / Cowl Panel Retainer / Engine Air Box Clip / Grille Retainer / Trunk Lining Retainer. Depending on the application, it is cataloged for front, rear, left, right, center, upper and lower locations.
- Drive-type rivet: A GM drive rivet made for an 8.25 mm hole, with a 20 mm diameter.
- Designed to match the original: Dorman built it to fit and work like the factory retainer on the listed applications.
- Durable material: Made from durable material and intended for long service.
- Versatile and good value: Suited to a variety of automotive uses, with original equipment quality at a competitive cost.
A retainer may need replacing if it is cracked, broken or missing. Other signs include a bumper cover, grille or trim panel that sags, rattles or shows gaps. Retainers can also break when a panel is removed for other repairs.
Interchange: 11589292 · 11612035
Frequently Asked Questions
What does the Dorman bumper cover retainer 700-049 do?
It is a drive-type rivet that fastens panels in place on the listed applications. It can hold bumper covers, grilles, cowl panels, engine air boxes and trunk linings.
What size is the 700-049 retainer?
It is a GM drive-type rivet made for an 8.25 mm hole, with a 20 mm diameter.
Does it fit a 2007-2013 Chevrolet Silverado 1500?
Yes. It is listed for the 2007-2013 Chevrolet Silverado 1500 and the 2010-2018 Chevrolet Equinox. Check the "Vehicles it fits" section for other vehicles.
How is a drive-type rivet retainer installed?
You push it into the mounting hole, then drive in the center pin so the rivet expands and holds. Follow the vehicle service information for the panel you are fastening.
When should I replace this retainer?
Replace retainers that are cracked, broken or missing. Also check them if a panel they hold sags, rattles or shows gaps.
