Dorman - Autograde Wheel Lug Stud P/N:610-566
Keep each rear wheel firmly anchored with this Dorman wheel lug stud from the Autograde line, part number 610-334. It is an M12-1.25 serrated stud with a 12.45mm knurl and a 33.5mm length, and it gives the lug nut solid threads to clamp the wheel in place. It fits many vehicles, among them the 1998-2000 Chevrolet Metro, the 1989-1991 Chevrolet Tracker and the 1989-1991 GMC Tracker. See the "Vehicles it fits" section for the full list.
Dorman makes these studs from carbon steel and tests them to demanding automotive industry standards for strength, longevity and safety. The 610-334 is a direct-fit replacement in the rear position for the listed applications.
Specifications: M12-1.25 thread, 12.45mm serrated knurl, 33.5mm length, rear position.
A stud may need replacing if its threads are stripped or cross-threaded, if it has broken, or if it spins in its flange. Always tighten the lug nuts to the torque listed in the vehicle service information.
Interchange: B142278 · 96057612 · 96062532 · 99721 · 97250 · 27794B · RB27794B · 0911912007 · 0911912011 · BD61430
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does a wheel lug stud do?
The stud is pressed into the wheel mounting flange, and the lug nut threads onto it to clamp the wheel in place. The Dorman 610-334 is a rear-position M12-1.25 serrated stud.
Will this stud fit my 1998-2000 Chevrolet Metro?
Yes. The 610-334 is listed for the rear position on the 1998-2000 Chevrolet Metro. The "Vehicles it fits" section shows the full fitment list.
Does it fit the 1989-1991 Chevrolet Tracker or GMC Tracker?
Yes. It is listed for the rear position on both the 1989-1991 Chevrolet Tracker and the 1989-1991 GMC Tracker.
What are the specifications of the Dorman 610-334?
It has an M12-1.25 thread, a 12.45mm serrated knurl and a 33.5mm length. It is made from carbon steel that meets SAE automotive industry standards for strength and hardness.
What are signs a lug stud needs replacing?
Signs include stripped or damaged threads, a broken stud, or a stud that spins in its flange. After installation, tighten the lug nuts to the torque listed in the vehicle service information.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.