Dorman - Autograde Wheel Lug Stud P/N:610-388
Keep your wheels firmly fastened with the Dorman wheel lug stud 610-365, an M12-1.50 serrated wheel stud made of carbon steel and tested to demanding automotive industry standards for strength, longevity and safety. It fits many vehicles, among them the 1986-1989 Ford Taurus, 1995-1998 Ford Windstar and 1991-1997 Ford Thunderbird. It is a direct-fit replacement for the listed applications and is cataloged for both front and rear wheel positions. See the "Vehicles it fits" section for the full list and engine details.
Specifications: M12-1.50 thread, 13.41mm serrated knurl, 51.5mm length.
A wheel stud anchors the wheel to the hub, and the lug nut threads onto it to clamp the wheel in place. Signs a stud may need replacing include stripped or damaged threads, a lug nut that will not tighten properly, or a stud that is bent or broken. Follow the vehicle service information for installation steps and lug nut torque.
Interchange: 61731 · B142301 · B142301CVS · B142302 · E6DZ1107A · F1SZ1107A · F2DZ1107A · F58Z1107AA · F5SZ1107AA · 97281 · 27867B · RB27867B · BD61184
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does the Dorman wheel lug stud 610-365 do?
It anchors the wheel to the hub. The lug nut threads onto the stud to clamp the wheel in place, so a stud with damaged threads or a bent or broken stud should be replaced.
What are the specifications of Dorman 610-365?
It is an M12-1.50 serrated wheel stud with a 13.41mm knurl and a 51.5mm length. It is made of carbon steel that meets SAE automotive industry standards for strength and hardness.
Which vehicles does this wheel lug stud fit?
It fits many vehicles, including the 1986-1989 Ford Taurus, 1995-1998 Ford Windstar and 1991-1997 Ford Thunderbird. It is cataloged for front and rear positions. The "Vehicles it fits" section lists every application.
How is this lug stud tested?
The lug studs undergo industry-standard proof-load testing to check their strength. They also go through extensive salt spray testing for rust resistance.
What are signs a wheel stud may need replacing?
Common signs are stripped or damaged threads, a lug nut that will not tighten properly, a stud that spins in the hub, or a stud that is bent or broken.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.