Give your lug nuts solid threads to clamp against with this Dorman wheel lug stud, part number 610-376, an M12-1.50 serrated wheel stud with a clip head, a 13.82mm knurl and a 49mm length. It fits many vehicles, among them the 1993-2000 Ford Taurus, 1994-2001 Ford Sable and 1998 Ford Windstar, as a direct-fit replacement for the listed applications at both front and rear wheel positions. See the "Vehicles it fits" section for the full list.
Dorman makes these lug studs from carbon steel and tests them to demanding automotive industry standards for strength, longevity and safety.
- Durable material: Carbon steel that meets SAE automotive industry standards for strength and hardness.
- Corrosion resistant: Extensive salt spray testing helps the stud stand up to rust.
- Tensile tested: The studs go through industry-standard proof-load testing to verify strength.
- Trustworthy quality: Backed by a U.S.-based team of professional engineers and quality control specialists.
A lug stud anchors the wheel to the wheel hub or axle flange. The serrated knurl grips the flange bore, and the lug nut threads onto the stud to clamp the wheel in place. Signs a stud may need replacing include stripped or cross-threaded threads, a bent or broken stud, or a stud that spins in its bore. Follow the vehicle service information for the installation procedure and lug nut torque.
Interchange: 561-251 · 561-376
B142232 · B142232CVS · E3FZ1107A · F3DZ1107A · F8DZ1107AA · 97292 · 25103B · 27886B · RB27886B · BD125955 · 561251 · 561376
This part cross-references / interchanges with the following part numbers:
B142232, B142232CVS, E3FZ1107A, F3DZ1107A, F8DZ1107AA, 561-251, 561-376, 97292, 25103B, 27886B, RB27886B, BD125955
Frequently Asked Questions
What size is the Dorman 610-376 wheel lug stud?
It has M12-1.50 threads, a 13.82mm serrated knurl, a clip head and a 49mm length.
Which vehicles does this wheel lug stud fit?
It fits many vehicles, including the 1993-2000 Ford Taurus, 1994-2001 Ford Sable and 1998 Ford Windstar. Check the "Vehicles it fits" section for your application.
What is the stud made of?
It is made of carbon steel that meets SAE automotive industry standards for strength and hardness. The studs also undergo industry-standard proof-load testing.
What are signs a wheel lug stud may need replacing?
Common signs include stripped or cross-threaded threads, a bent or broken stud, or a stud that spins in the hub flange.
How is a serrated wheel lug stud installed?
A serrated stud is pressed into the wheel hub or axle flange so its knurl grips the bore. Follow the vehicle service information for the procedure and the lug nut torque.
