Dorman - Autograde Wheel Lug Stud P/N:610-186.1
Give your lug nuts fresh, solid threads to clamp against with the Dorman wheel lug stud 610-490 from the Autograde line, a front M14-1.5 serrated stud that helps hold the wheel firmly against the hub. It fits many vehicles, among them the 2011-2025 Ford F-53 Motorhome Chassis, 2003-2009 Ford F-350 and 2005-2016 Ford F-550 Super Duty, as a direct-fit replacement for the listed applications.
Dorman makes these wheel lug studs from carbon steel and tests them to demanding automotive industry standards for strength and safety.
Specifications: M14-1.5 serrated wheel stud · 15.7mm knurl · 69.75mm length · front position.
A stud with stripped or damaged threads, or one that has bent or snapped, may not let the lug nut hold proper clamping force. This stud replaces the compromised one so the lug nut has sound threads to seat against. Follow the vehicle service information for installation and lug nut torque. See the Buyer's Guide tab for the full list of fitting vehicles.
Interchange: 2C2Z1107AA
This part cross-references / interchanges with the following part numbers:
What does a wheel lug stud do?
It is the threaded stud that the lug nut tightens onto, clamping the wheel against the hub. This Dorman 610-490 is cataloged for the front position on the listed applications.
What are the specifications of Dorman 610-490?
It is an M14-1.5 serrated wheel stud with a 15.7mm knurl and an overall length of 69.75mm, made of carbon steel that meets SAE standards for strength and hardness.
Will this Dorman wheel stud fit my 2003-2009 Ford F-350?
It is listed for the 2003-2009 Ford F-350 and the 2011-2025 Ford F-53 Motorhome Chassis, among many other vehicles. Check the Buyer's Guide tab to confirm your exact vehicle.
How is a serrated wheel stud installed?
The serrated knurl is pressed into the mounting flange so the stud does not spin. Follow the vehicle service information for removal, installation and lug nut torque.
What are signs a wheel lug stud may need replacing?
Stripped or damaged threads, a bent or stretched stud, a stud that spins in its bore, or one that has snapped are signs it may need replacing.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.