Dorman - Conduct-Tite

Switch high-current accessory loads with confidence using the Dorman - Conduct-Tite 5 Pin 30A Relay (MPN 88069), a 30-amp, 12-volt, 5-pin universal relay. It uses a small control current to activate...

Keep power switching cleanly to the circuit it controls with the Dorman - Conduct-Tite 4-Pin Relay 84601. This 30-amp, 12-volt, 4-pin universal relay uses a low-current control signal to open and...

This alternator connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and...

Get a clean, secure bulb connection with the Dorman - Conduct-Tite side marker light socket 85814, a 2-wire electrical socket for license plate and side marker lamps. It holds the bulb and completes...

Dorman's Socket Assemblies are engineered with extra-long leads and multiple butt connectors.Constructed of high-quality materials for long-lasting durabilityManufactured to strict engineering...

Replace a worn or damaged cornering light socket with the Dorman Conduct-Tite 85830 Cornering Lamp Socket, a 3-wire electrical socket assembly built with extra-long leads to make wiring repairs...

Give your lamp bulb a new connection point with the Dorman tail lamp socket 85832 from the Conduct-Tite line, a 3-wire, 90-degree double-contact socket for front and rear lamp positions. It fits many...

Replace a worn or damaged turn signal bulb holder with the Dorman Conduct-Tite Turn Signal Lamp Socket 85833, a 3-wire, double-contact electrical socket with a neoprene sleeve, built for front and...

Dorman's Socket Assemblies are engineered with extra-long leads and multiple butt connectors.Constructed of high-quality materials for long-lasting durabilityManufactured to strict engineering...

Replace a worn, corroded or damaged turn signal socket with the Dorman Conduct-Tite 85818 Turn Signal Lamp Socket, a 2-wire electrical socket for front and rear lamp positions. It fits many vehicles,...

Give your turn signal bulb a fresh, secure electrical connection with the Dorman Conduct-Tite 85898 Turn Signal Lamp Socket, a 3-wire full-size socket assembly. It fits many vehicles, among them the...

Give your turn signal and stop lamp bulb a fresh, secure mounting point with the Dorman Conduct-Tite Turn Signal Lamp Socket 85860, a 2-wire universal turn and stop socket with a ground tab. It fits...

This carburetor choke thermostat connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for...

This engine coolant temperature sensor connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for...

Replace a cracked, loose or missing headlight plug with the DORMAN headlight connector 85809. It is a Conduct-Tite 2-wire, 2-terminal socket that connects the vehicle's headlight wiring to a sealed...

Replace a burned, corroded or broken headlight plug with this Dorman headlight connector, part number 85810 from the Conduct-Tite line, a 3-wire, 3-terminal socket for sealed beam lamps and H4/9003...

Reconnect your H7 low-beam bulb to the vehicle's headlight circuit with the Dorman - Conduct-Tite Socket H7 Headlight (MPN 84717). It drops in as a direct-fit replacement for the H7 low-beam socket...

Replace a melted or corroded headlight connector without swapping out the whole harness using the Dorman headlamp socket 84783 from the Conduct-Tite line. This 2-wire H8/H11 harness headlight socket...

Replace a melted, corroded or damaged bulb connector with the Dorman headlamp socket 84785 from the Conduct-Tite line, a headlight socket made for the H13/9008 bulb. It fits many vehicles, among them...

Replace a damaged or corroded low-beam connection with the Dorman Conduct-Tite Headlamp Socket 84790, a standard replacement Dorman headlamp socket built with corrosion-resistant electrical contacts...

Get a solid, high-temperature connection at your headlight with the Dorman Conduct-Tite High Temperature Socket 84791, a direct replacement pigtail for 9004/9007 bulbs. It drops into a wide range of...

This replacement headlight socket matches the fit and terminal count of the original equipment socket for specified vehicles. Made of quality materials with corrosion-resistant contacts, this socket...

Replace a damaged 9006 bulb connection with this Dorman headlamp socket, part number 84793 from the Conduct-Tite line, a high-temperature replacement socket built for a 9006 bulb. It fits many...

Replace a damaged headlight bulb connector with the Dorman headlamp socket, Conduct-Tite part number 85811. It is a 3-wire socket for 9004 and 9007 halogen bulbs, cataloged for the high-beam position...

Keep your high beams firing with the DORMAN headlamp socket (Conduct-Tite 85812), a 2-wire replacement socket for a 9005 halogen high-beam bulb. It's built to match the terminal count of the original...

Help restore a solid connection to your headlight bulb with the Dorman - Conduct-Tite headlamp socket 85813, a 2-wire socket built to accept the 9006 halogen bulb. It's engineered to drop in like the...

If a corroded or broken socket is leaving your license plate in the dark, the Dorman Conduct-Tite License Lamp Socket 85889 is designed to replace it. This 2-wire socket holds the license plate bulb...

Dorman's Socket Assemblies are engineered with extra-long leads and multiple butt connectors.Constructed of high-quality materials for long-lasting durabilityManufactured to strict engineering...

If a corroded or heat-damaged socket is why a license plate or side marker lamp won't light, the Dorman Conduct-Tite 85868 License Lamp Socket replaces it. This 2-wire socket holds the bulb and...