Dorman - First Stop Brake Hydraulic Hose P/N:H622701
Keep brake fluid moving from the rigid brake line to the wheel with the Dorman brake hydraulic hose H380713 from the Dorman - First Stop line. It fits many vehicles, among them the 1971-1972 Chevrolet C10 Pickup, 1971-1972 Chevrolet C20 Pickup and 1971-1972 Chevrolet C20 Suburban, as a direct-fit replacement for the listed applications. See the Buyer's Guide tab for the full list. It is a front left hose that the manufacturer engineered to mirror the original hose's fit, function and performance.
A flexible hydraulic hose lets the brake line follow the wheel as the suspension moves and the front wheels steer. It carries pressurized fluid each time the pedal is pressed. Signs that a hose may need replacing include cracking, bulging or chafing on the outer cover, fluid seepage at a fitting, or a soft or spongy pedal. Diagnose the cause before you replace parts. After installation, bleed the brake system. Follow the vehicle service information for the correct installation hardware and torque values.
Interchange: 150.66087 · 350-48014
15066087 · 35048014 · 611223 · BH413580 · BH380713 · 2203187
This part cross-references / interchanges with the following part numbers:
Which trucks does the Dorman H380713 brake hose fit?
It fits many vehicles, among them the 1971-1972 Chevrolet C10 Pickup, 1971-1972 Chevrolet C20 Pickup and 1971-1972 Chevrolet C20 Suburban. Check the Buyer's Guide tab for your exact vehicle.
Which wheel position is this hose for?
The H380713 is cataloged for the front left position. It is made to position-specific measurements for an exact fit and easy installation.
What is this brake hydraulic hose made of?
Dorman makes it with EPDM rubber and specially coated, corrosion-resistant fittings. Its materials are tested to government-regulated safety and durability standards.
What are signs a brake hose may need replacing?
Cracks, bulges or chafing on the hose, fluid seepage at a fitting, or a soft, spongy pedal may indicate a worn hose. Inspect the brake system to confirm the cause before you replace parts.
What should I do after installing it?
Bleed the brake system to remove air, and follow the vehicle service information for the correct installation hardware and fitting torque. Check for leaks before driving.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.