Keep pressurized brake fluid flowing safely between the chassis and the wheel with the Dorman - First Stop Brake Hydraulic Hose H38265. It installs as a position-specific, direct-fit replacement for the 1983-1986 Chevrolet K30, 1983-1986 GMC K3500, 1987-1988 Chevrolet V30, 1987-1991 GMC V3500, 1989-1991 Chevrolet V3500, 1995-1996 Chevrolet P30, and 1995-1996 GMC P3500 (all engines), cataloged for the front right and rear right outer positions.
A brake hydraulic hose is a flexible line that carries pressurized brake fluid from the rigid chassis line to the moving caliper or wheel cylinder, flexing with suspension and steering travel. This unit uses a banjo fitting at End 1 (10 mm thread) and a female fitting at End 2 (3/8-24 inside diameter), with an overall length of 19.5 inches and a black finish. Because a bracket and hardware are not included, transfer or replace those as directed by the vehicle's service procedure. Signs a hose may need replacing include surface cracking, bulging under pressure, fluid seepage at the fittings, or a spongy pedal; if a failed hose is the cause, this replaces it. Country of origin: China.
Interchange: 18J352 · 87-44027 · 8744027 · B917152 · 610478 · HB-86027 · HB86027 · 77420 · 150.66027 · 15066027 · BH177420 · 350-48009 · 35048009 · 14054270 · 9768312 · 4538265 · BH38265 · 2203447 · BH107275 · F107275. Manufacturer part number H38265.
This part cross-references / interchanges with the following part numbers:
What vehicles does the Dorman H38265 brake hose fit?
It's a direct-fit replacement for the 1983-1986 Chevrolet K30 and GMC K3500, 1987-1988 Chevrolet V30, 1987-1991 GMC V3500, 1989-1991 Chevrolet V3500, and 1995-1996 Chevrolet P30 and GMC P3500 (all engines).
What position is this hose for?
The catalog lists it for the front right and rear right outer positions. Check the Buyer's Guide to confirm which position your vehicle needs before ordering.
What is the hose made of, and what are the fittings?
EPDM rubber with specially coated, corrosion-resistant treated-steel fittings: a banjo fitting at End 1 (10 mm thread) and a female fitting at End 2 (3/8-24 inside diameter). Overall length is 19.5 inches.
Is a bracket or mounting hardware included?
Gaskets are included, but a mounting bracket and mounting hardware are not. Transfer or replace those as directed by the vehicle's service procedure.
How do I know if my brake hose needs replacing?
Signs a brake hose may need replacing include surface cracking, bulging under pressure, fluid seepage at the fittings, or a spongy pedal. Diagnose the cause first; if the hose is at fault, this replaces it.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.