Keep a firm, responsive brake pedal on the front right corner with the Dorman - First Stop Brake Hydraulic Hose H620007. This flexible hydraulic hose carries pressurized brake fluid from the chassis hard line to the wheel end while flexing with suspension travel and steering movement — a job a rigid line can't do. It installs as a direct-fit replacement in the front right position for the 1998-2002 Ford Crown Victoria, 1998-2002 Ford Grand Marquis, 1998-2002 Lincoln Town Car, and 1998-2002 Mercury Grand Marquis.
Interchange: 18J1701 · B918074 · 611356 · HB-81083 · HB81083 · 78896 · 78996 · 150.61091 · BH414620 · 350-56017 · 35056017 · 1W7Z2078AA · F8AZ2078AB · BH381144 · 2203686 · BH140155 · F140155
Manufacturer part number H620007.
This part cross-references / interchanges with the following part numbers:
What does this brake hydraulic hose do?
It carries pressurized brake fluid from the chassis hard line to the wheel end while flexing with suspension and steering movement, which a rigid metal line cannot do.
Which position does H620007 fit?
It is cataloged for the front right position on the listed applications.
What vehicles does it fit?
The 1998-2002 Ford Crown Victoria, 1998-2002 Ford Grand Marquis, 1998-2002 Lincoln Town Car, and 1998-2002 Mercury Grand Marquis. Confirm fitment for your vehicle.
What are signs a brake hose needs replacing?
Cracking, bulging, or chafing of the hose, fluid seepage at the fittings, or a soft, spongy pedal. Diagnose the cause first; if the hose is at fault, this replaces it.
Should the brake system be bled after installation?
Opening the hydraulic line introduces air, so the brakes should be bled afterward per the vehicle service procedure to restore a firm pedal.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.