Keep pressurized brake fluid moving to the rear right wheel with the Dorman - First Stop Brake Hydraulic Hose H620316. This flexible hose carries hydraulic pressure from the vehicle's hard line to the brake at the rear right position, and it installs as a position-specific replacement across a range of Ford full-size vans — the 2000 Ford E-350 Econoline and 2000 E-350 Super Duty, the 2000-2001 E-350 Econoline Club Wagon, the 2001-2002 E-250 Econoline, the 2003-2007 E-250, the 2003-2005 E-350 Club Wagon, and the 2004-2007 E-350 Super Duty (engine: All).
Engineered to deliver the same fit, function, and braking performance as the original hose in the rear right position of the listed vans. Gaskets are included; mounting hardware and a mounting bracket are not included — consult the vehicle service information for the correct fasteners and whether they may be reused. Signs the original hose may need replacing include a soft or spongy pedal, fluid seepage, cracking, or bulging; if a failed brake hose is the cause, this replaces it. Color: black. Country of origin: China.
Interchange: 611723 · 150.65369 · 15065369 · 150.65371 · 15065371 · 350-54546 · 35054546 · 4C2Z2A442CA · 6C2Z2A442CA · YC2Z2A442CA · BH382493 · 2202993 · BH142753 · F142753
Manufacturer part number H620316
This part cross-references / interchanges with the following part numbers:
What does the Dorman H620316 brake hydraulic hose do?
It is a flexible line that carries pressurized brake fluid from the hard line to the brake at the rear right position, letting the hydraulic system work as the suspension moves.
Which position does this hose fit?
It is a position-specific hose for the rear right location on the listed vehicles.
What is included in the box?
One brake hose and gaskets. Mounting hardware and a mounting bracket are not included; consult the vehicle service information for the correct fasteners.
What vehicles does this hose fit?
Select Ford E-250 and E-350 vans built from 2000 to 2007 (Econoline, Econoline Club Wagon, Club Wagon, and Super Duty). See the Buyer's Guide tab for the exact years and sub-models.
What is the hose made of and is it DOT approved?
The hose is EPDM rubber with a banjo fitting and a female 3/8 in-24 fitting on coated, corrosion-resistant treated-steel ends. It is DOT approved.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.