Dorman H621255 front left brake hydraulic hose for the 1992-2002 Dodge Viper carries brake fluid pressure to the brake at the front left wheel. This Dorman brake hydraulic hose is a flexible hose, so it stays connected as the wheel moves with the suspension and steering.
- EPDM rubber hose with a rubber outer sleeve
- Treated steel end fittings with a corrosion-resistant coating
- Banjo fitting on end 1 and a female inverted-flare fitting on end 2
- Made to precise measurements for its position, for easy installation
- DOT approved, with materials tested to government-regulated safety and durability standards
Quick facts
- Part: Dorman H621255 brake hydraulic hose
- Fits: 1992-2002 Dodge Viper
- Position: Front left
- Material: EPDM rubber
- Condition: New
Cracks or bulges in the rubber, fluid seepage at a fitting or a soft pedal can mean this hose is worn, though a worn brake caliper or master cylinder can also be behind a soft pedal.
Fits
It fits the 1992-2002 Dodge Viper. This listing is one hose for the front left; the front right is a separate part, and the two on the front axle are normally replaced at the same time. The front axle uses one hose per side.
Specifications
Fit and size
- Position: Front left
- Quantity: one per side of the axle
- Overall length: 25.5 in
- End 1 thread size: 10 mm
- End 2 thread size: 3/8-24 in
- End 2 fitting inside diameter: 3/8-24 in
Build and materials
- Type: Flexible hose
- Hose material: EPDM rubber
- Outer sleeve material: Rubber
- End 1 fitting: Banjo, treated steel
- End 2 fitting: Female, inverted flare, treated steel
- DOT approved: Yes
- Condition: New
- Country of origin: China
In the box
One brake hose and gaskets. Mounting hardware and a bracket are not included, so plan on new mounting hardware.
Interchange: 150.63042 · 150.63064 · 350-40034
612710 · 4642229 · 4763155 · 4763155AB · BH384232 · 2204602 · BH141227 · F141227
This part cross-references / interchanges with the following part numbers:
612710, 150.63042, 150.63064, 4642229, 4763155, 4763155AB, 350-40034, BH384232, 2204602, BH141227, F141227
Frequently Asked Questions
Is the Dorman H621255 front left hose made for the 1992-2002 Dodge Viper?
Yes. Dorman H621255 is a front left brake hydraulic hose for the 1992-2002 Dodge Viper. The front right side is a separate part.
Do gaskets come with the Dorman H621255, or only the hose?
Yes, Dorman H621255 comes with one brake hose and gaskets. Mounting hardware and a bracket are not included.
What thread sizes does this brake hydraulic hose have at each end?
End 1 is 10 mm with a banjo fitting. End 2 is 3/8-24 in with a female inverted-flare fitting.
How can I tell if a front left brake hydraulic hose is worn?
With the engine off and cool, look for cracks, bulges or fluid seepage on the rubber and at the fittings. A soft pedal can also be a sign, so have a shop inspect the brakes promptly.
Is this brake hydraulic hose made of EPDM rubber?
Yes. The hose is EPDM rubber with a rubber outer sleeve, and the end fittings are treated steel with a corrosion-resistant coating.
