Add to Cart
The item has been added
Dorman - First Stop Brake Hydraulic Hose P/N:H621344
$27.99
Keep hydraulic pressure moving to the front-left brake with the Dorman - First Stop Brake Hydraulic Hose H621344. It installs as a direct-fit replacement for the front-left position on the 2007-2010 Hyundai Elantra [All], carrying pressurized brake fluid from the chassis hard line to the caliper while flexing with the suspension and steering as the wheel moves through its travel.
Manufactured to precise measurements for an exact fit and straightforward installation on the listed application and position:
- Durable construction: EPDM rubber hose with a rubber outer sleeve and specially coated, corrosion-resistant treated-steel fittings.
- Fitting details: banjo fitting on End 1 with a 10 mm thread size; female fitting on End 2 sized M10 x 1.0.
- DOT approved: materials tested to government-regulated safety and durability standards; overall length 21.13 in.
- What's included: one brake hose with gaskets; mounting hardware, a bracket, and a jacket are not included.
Signs this hose may need replacing include cracking, bulging under pressure, chafing, or fluid seepage at the fittings, which can be felt as a soft or spongy pedal. If a failed front-left brake hose is the cause, this replaces it. Consult the vehicle service information for the correct fasteners and whether any may be reused. Country of origin: China.
Interchange: 613387 · 150.51078 · 350-03045 · 35003045 · 587312H000 · BH383440 · 2201389 · BH144089 · F144089
Manufacturer part number H621344
This part cross-references / interchanges with the following part numbers:
613387, 150.51078, 350-03045, 587312H000, BH383440, 2201389, BH144089, F144089
Frequently Asked Questions
What does this brake hydraulic hose do?
It carries pressurized brake fluid from the chassis hard line to the front-left caliper, flexing with the suspension and steering as the wheel moves through its travel.
Which vehicle does it fit?
It's a direct-fit replacement for the front-left position on the 2007-2010 Hyundai Elantra [All]. See the Buyer's Guide tab to confirm the fit for your vehicle.
What's included in the package?
One brake hose plus gaskets. Mounting hardware, a bracket, and a jacket are not included; consult the service information for the correct fasteners and whether any may be reused.
What are the fittings and thread sizes?
End 1 is a banjo fitting with a 10 mm thread size; End 2 is a female fitting sized M10 x 1.0. The hose has an overall length of 21.13 in.
What are signs the hose may need replacing?
Cracking, bulging under pressure, chafing, or fluid seepage at the fittings, often felt as a soft or spongy pedal. Diagnose the cause before replacing.
Write a Review
Dorman
Dorman - First Stop Brake Hydraulic Hose P/N:H621344
Related Products
Add to Cart
The item has been added