Dorman - First Stop Brake Hydraulic Hose P/N:H621416
$17.99
(You save)
Keep firm hydraulic pressure flowing to your rear brakes with the Dorman - First Stop Brake Hydraulic Hose H621416. This flexible brake hose carries pressurized brake fluid from the rigid line to the caliper while flexing with suspension and steering movement, and it drops in as a direct-fit replacement for the rear outer position on the 2008-2015 Scion xB, 2010-2014 Toyota Prius, 2012-2018 Toyota Prius V, and 2016-2020 Toyota Mirai (All).
Durable design: EPDM rubber hose paired with treated-steel fittings that carry a corrosion-resistant coating.
Position-specific fit: built to precise measurements to match the original hose's fit and function on the listed vehicles and install without modification.
Fittings: banjo fitting at End 1 (10 mm thread) and a female fitting at End 2 (M10 x 1.0); 8.25 in overall length.
Quality assured: DOT approved and tested to government-regulated safety and durability standards.
Signs this hose may need replacing include a cracked, bulging, or leaking hose and a soft or spongy pedal — if a failed rear hose is the cause, this replaces it. Gaskets are included; mounting hardware and a bracket are not, so consult the vehicle service information for the correct fasteners and whether they may be reused. Sold individually; order two to replace both rear hoses together. Country of origin: China.
It carries pressurized brake fluid from the rigid brake line to the caliper while flexing with suspension movement, so hydraulic pressure can reach the rear brake.
Which vehicles does the H621416 fit?
It's a direct-fit replacement for the 2008-2015 Scion xB, 2010-2014 Toyota Prius, 2012-2018 Toyota Prius V, and 2016-2020 Toyota Mirai (All). See the Buyer's Guide tab to confirm.
What position does it install in?
It fits the rear outer position (rear left or rear right). It's sold individually, so order two if you're replacing both rear hoses.
Is mounting hardware included?
Gaskets are included, but mounting hardware and a bracket are not. Consult the vehicle service information for the correct fasteners and whether they can be reused.
What is it made of and is it DOT approved?
It's built from EPDM rubber with treated-steel, corrosion-resistant fittings, and it is DOT approved and tested to government-regulated safety and durability standards.
Write a Review
Dorman
Dorman - First Stop Brake Hydraulic Hose P/N:H621416
The Dorman - First Stop Brake Hydraulic Hose H38426 is the flexible link that carries pressurized brake fluid from the frame-mounted steel line to the brake at the wheel, flexing with suspension...
Keep pressurized brake fluid moving from the hard line to the caliper with the Dorman - First Stop Brake Hydraulic Hose (H620396), a flexible brake hose that flexes with suspension and steering...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
