Dorman - First Stop Brake Hydraulic Hose P/N:H621460
$25.99
(You save)
Keep firm, responsive braking flowing to the front-left corner with the Dorman First Stop Brake Hydraulic Hose H621460. This flexible brake hose carries pressurized brake fluid from the chassis hard line to the caliper while flexing with suspension and steering movement, and it installs in the front-left position as a direct-fit replacement for the 2010-2011 Ford F-150 and 2010-2012 Ford Lobo (All).
Durable construction: EPDM rubber hose with a rubber outer sleeve and specially coated, corrosion-resistant treated-steel fittings — a banjo fitting on one end and a female fitting on the other.
Position-specific fit: built to precise measurements for the front-left location, with an overall length of 17.75 in, a 0.38 in thread on End 1 and an M10 x 1.0 fitting on End 2.
Included: ships with gaskets and a stamped-steel bracket; mounting hardware is not included — consult the vehicle service information for the correct fasteners and whether they may be reused.
Quality assured: DOT approved, with materials tested to government-regulated safety and durability standards.
Signs this hose may need replacing include a soft or spongy pedal, visible fluid seepage, or a bulging, cracked, or chafed outer cover. If a failed brake hose is the cause, this replaces it. Country of origin: China.
It carries pressurized brake fluid from the chassis hard line to the caliper while flexing with suspension and steering movement, keeping hydraulic pressure to the brake.
Which vehicles does the H621460 fit?
It's a direct-fit replacement for the 2010-2011 Ford F-150 and 2010-2012 Ford Lobo (All engines). Check the Buyer's Guide tab to confirm your vehicle.
What position is this hose for?
It is cataloged for the front-left position and built to precise measurements for that location for an exact fit and easy installation.
What comes in the package?
The listing includes one brake hose, gaskets, and a stamped-steel bracket. Mounting hardware is not included; check the service information for the correct fasteners.
What are signs this hose should be replaced?
A soft or spongy pedal, visible fluid seepage, or a bulging, cracked, or chafed cover. If a failed hose is the cause, this replaces it; diagnose the source first.
Write a Review
Dorman
Dorman - First Stop Brake Hydraulic Hose P/N:H621460
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
