Dorman - First Stop Brake Hydraulic Hose P/N:H622279
$27.99
(You save)
Keep hydraulic pressure moving to the rear brakes with the Dorman - First Stop Brake Hydraulic Hose H622279. This flexible brake hose carries pressurized brake fluid between the hard line and the wheel end, flexing with suspension and steering movement so fluid keeps flowing when you press the pedal. It's a direct-fit replacement built to the original hose's fit, function and performance for the rear position on 2014, 2015-2016 and 2017 RAM 2500 and 2014 and 2015-2017 RAM 3500 trucks (all engines).
Position-specific: manufactured to precise measurements for the rear position for an exact fit and easy installation.
Quality assured: DOT approved, with materials tested to government-regulated safety and durability standards.
Fitting details: female inverted-flare ends — End 1 M12 x 1.0, End 2 3/8-24 — with an overall length of 24.25 in and a protective rubber outer jacket.
The package contains one brake hose. No bracket, mounting hardware, or gasket/seal is included — consult the vehicle service information for the correct fasteners and whether they may be reused. If a cracked, swollen, or leaking rear brake hose is your problem, this replaces it.
It's a flexible line that carries pressurized brake fluid from the hard line to the rear wheel end, flexing with suspension and steering movement so the brakes stay supplied with fluid.
Which vehicles does the H622279 fit?
It fits the rear position on 2014, 2015-2016 and 2017 RAM 2500 and 2014 and 2015-2017 RAM 3500 trucks (all engines). See the Buyer's Guide tab to confirm your vehicle.
What are the end fittings and threads?
Both ends use female inverted-flare fittings in treated steel — End 1 is M12 x 1.0 and End 2 is 3/8-24. Overall length is 24.25 in.
Is any bracket, hardware, or gasket included?
No. The package contains one brake hose only; no bracket, mounting hardware, or gasket/seal is included. Consult the service information for the correct fasteners and whether they may be reused.
Is this hose DOT approved and what is it made of?
Yes, it's DOT approved. The hose is EPDM rubber with a rubber outer jacket and coated, corrosion-resistant treated-steel fittings.
Write a Review
Dorman
Dorman - First Stop Brake Hydraulic Hose P/N:H622279
The Dorman - First Stop Brake Hydraulic Hose H38426 is the flexible link that carries pressurized brake fluid from the frame-mounted steel line to the brake at the wheel, flexing with suspension...
Keep pressurized brake fluid moving from the hard line to the caliper with the Dorman - First Stop Brake Hydraulic Hose (H620396), a flexible brake hose that flexes with suspension and steering...
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
