Dorman - First Stop Brake Master Cylinder P/N:M390233
Send pedal effort to the brakes as hydraulic pressure with the Dorman brake master cylinder M390117 from Dorman - First Stop. It is a direct-fit replacement for the 1992-1993 Ford E-150 Econoline, Ford E-150 Econoline Club Wagon, Ford E-250 Econoline, Ford E-350 Econoline and Ford E-350 Econoline Club Wagon. It is precision-engineered to match the original master cylinder's design, function and performance on these models.
Specifications: This master cylinder has a 1.125 in bore and 4 outlets: two 9/16-18 rearward outlets and two 7/16-24 secondary outlets. The reservoir and sensor are included. Mounting hardware is not included. Each listed application uses one. Country of origin: China.
A master cylinder may need replacing if you notice a soft or sinking brake pedal, brake fluid leaking at the cylinder, or a fluid level that keeps dropping. Other brake faults can cause these same symptoms, so diagnose the system first. If the master cylinder is the cause, this unit replaces it.
Fitment:
Interchange: 83-42038 · 100-2482 · M-85038 · 13-2611 · 10-2611 · 130.65038 · 131.65038 · 355-54157
8342038 · 1002482 · M85038 · 132611 · 102611 · 13065038 · 13165038 · 35554157 · 18M631 · M900841 · 12641 · 12642 · MC250390 · F2UZ2140A · F2UZ2140B · NM3020 · MC390117 · F129285 · F129286 · MC129285 · MC129286
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Do I need a Dorman master cylinder bleeder kit to install this?
A new master cylinder must be bled of air before use, and the brake system must be bled after installation. Use the procedure and tools given in the vehicle service information.
Which vehicles does M390117 fit?
It is listed for the 1992-1993 Ford E-150 Econoline, Ford E-150 Econoline Club Wagon, Ford E-250 Econoline, Ford E-350 Econoline and Ford E-350 Econoline Club Wagon, with the engine listed as All.
What are the bore size and outlet threads?
It has a 1.125 in bore and 4 outlets: two 9/16-18 rearward outlets and two 7/16-24 secondary outlets.
What materials is this master cylinder made from?
The master cylinder is aluminum. All of its rubber components are a high-quality EPDM compound that resists glycol-based brake fluid.
What are signs the master cylinder may need replacing?
A soft or sinking pedal, fluid leaking at the cylinder, or a dropping fluid level can be signs of a failing master cylinder. Other brake faults cause these too, so diagnose before replacing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.