Dorman - First Stop Brake Master Cylinder P/N:M390392
Dorman M39411 brake master cylinder for the 1986-1987 Mazda 323 and other vehicles turns pedal force into hydraulic pressure for the brakes. Its two outlets send that pressure on to the brake lines.
A soft or sinking brake pedal, a falling fluid level or fluid around the cylinder body can be signs of a worn brake master cylinder. Before you buy, look at the reservoir level and for wet spots around the cylinder with the engine off, because leaks elsewhere in the brake system can show up the same way.
The 1986-1987 Mazda 323 and the 1983-1987 Mazda 626 both take this brake master cylinder, one per car. It is built to match the design, function and performance of the original brake master cylinder on these vehicles.
Fit and size
Build and materials
One brake master cylinder with its reservoir and sensor. Mounting hardware is not included, so plan on new hardware, since old fasteners may not be reusable.
Interchange: 783-14202 · 783-18502 · 83-14202 · 100-1739 · M-53202 · 072-8348 · 13-39411 · 11-2212 · 130.45202 · 131.45202 · 355-80031
18M215 · M900415 · 11973 · 12235 · MC108149 · MC1081491 · M52212 · NM52212 · BF6743400 · BF6743400A · GA9743400 · GA9743400A · MC39411 · F108149
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Dorman M39411 a Mazda 323 master cylinder for the 1986-1987 model years?
Yes. Dorman M39411 fits the 1986-1987 Mazda 323, and the car takes one brake master cylinder.
Is this a brake master cylinder for the 1983-1987 Mazda 626?
Yes. This brake master cylinder fits the 1983-1987 Mazda 626, and the car takes one.
Does the Dorman brake master cylinder include the reservoir and sensor?
Yes. Dorman M39411 comes with its reservoir and sensor. Mounting hardware is not included.
What is the bore size of this Dorman master cylinder?
The bore diameter is 0.875 inch. This brake master cylinder has two outlets, and the rearward and secondary outlet threads are M10 X 1.0.
What are the rubber parts in this brake master cylinder made of?
All the rubber components are made of EPDM compound, which resists glycol-based brake fluid. The cylinder body is aluminum.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.