Dorman - First Stop Brake Master Cylinder P/N:M39855

Be the first to review this product
$176.99
MPN: M39855
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Dorman - First Stop Brake Master Cylinder P/N:M39855
Dorman - First Stop Brake Master Cylinder P/N:M39855
$176.99

Turn firm pedal pressure into the hydraulic force that applies your brakes with the Dorman - First Stop Brake Master Cylinder M39855. It fits as a direct-fit replacement for the 1989 Dodge 2000 GTX, 1990-1992 Mitsubishi Galant, 1991-1994 Eagle Talon, 1991-1994 Mitsubishi Eclipse, and 1992-1994 Plymouth Laser.

  • Core job: Houses the pistons that pressurize brake fluid when you press the pedal, sending hydraulic pressure through the brake circuits to the wheels.
  • Signs it may need replacing: A pedal that slowly sinks under steady foot pressure, a spongy or low pedal, or brake-fluid seepage around the cylinder body can point to a worn master cylinder.
  • Direct-fit design: Made to replace the master cylinder on the listed applications.

Because a soft or sinking pedal can also come from air in the lines, worn calipers, or leaking wheel cylinders, diagnose the cause before replacing. If a failed master cylinder is the source of the problem, this unit replaces it. Bleed the brake system after installation to remove air and confirm a firm pedal, and follow the vehicle service information for the correct procedure and fasteners.

Manufacturer part number M39855.

Frequently Asked Questions

Which vehicles does the M39855 fit?

It fits the 1989 Dodge 2000 GTX, 1990-1992 Mitsubishi Galant, 1991-1994 Eagle Talon, 1991-1994 Mitsubishi Eclipse, and 1992-1994 Plymouth Laser. See the Buyer's Guide tab to confirm your vehicle.

What does a brake master cylinder do?

It converts the force from your brake pedal into hydraulic pressure, pushing brake fluid through the lines to actuate the brakes at each wheel.

What are signs my master cylinder may be failing?

A pedal that slowly sinks under steady pressure, a spongy or low pedal, or brake-fluid seepage around the cylinder can all be signs it may need replacing.

Do I need to bleed the brakes after installing this?

Yes. Bleed the brake system after installation to remove trapped air and confirm a firm pedal, following the vehicle service information for the correct procedure.

What is the manufacturer part number?

This is Dorman - First Stop manufacturer part number M39855, a Brake Master Cylinder.