Dorman - First Stop Brake Master Cylinder P/N:M390233
Dorman M630204 brake master cylinder for the 2002-2005 Volkswagen Passat and other vehicles turns pedal force into hydraulic pressure for the brakes. Brake fluid leaves through two outlets to the lines.
A pedal that sinks or feels spongy, fluid on the cylinder body or a brake fluid level that keeps dropping can mean the master cylinder is failing, but a leak elsewhere in the brake system or air in the lines can look the same. With the engine off, look over the cylinder and the brake lines for wet fluid before you replace anything.
The vehicles it fits include the 2002-2005 Volkswagen Passat, the 2002-2004 Audi A6 and the 2002-2006 Audi A6 Quattro. The 2002-2004 Audi A6 takes one, and this listing is one master cylinder.
Fit and size
Build and materials
One master cylinder. The reservoir, sensor and mounting hardware are not included, so plan on new mounting hardware rather than reusing the old.
Interchange: 100-1064 · 13-3051 · 11-3051 · 130.33116 · 355-74000
M901216 · 13611 · M55281 · NM55281 · MC390778 · 8E0611021 · F141623 · F141792 · F142397 · MC141623 · MC141792 · MC142397
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dorman M630204 work as a master cylinder for the 2002-2005 Volkswagen Passat?
Yes, the Dorman M630204 fits the 2002-2005 Volkswagen Passat, and the car takes one. If your car is a different model, look for its year and model in the "Vehicles it fits" section on this page.
Can I use the Dorman M630204 as a master cylinder on a 2002-2004 Audi A6?
Yes. The Dorman M630204 fits the 2002-2004 Audi A6, and the 2002-2006 Audi A6 Quattro is covered as well.
Does the Dorman M630204 come with a reservoir or mounting hardware?
No. The Dorman M630204 comes as the master cylinder only; the reservoir, sensor and mounting hardware are not included.
What size are the outlet threads on the Dorman M630204?
The rearward outlet is M12 x 1.0 and the secondary outlet thread diameter is M12 x 1.0. The bore diameter is 1 inch.
What are the rubber parts in this brake master cylinder made of?
All rubber components are EPDM compound, which resists glycol-based brake fluid. The cylinder itself is aluminum.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.