Dorman - First Stop Brake Master Cylinder P/N:M630623
Turn every press of the brake pedal into hydraulic pressure at the wheels with this 2004-2009 Toyota Sienna master cylinder from Dorman First Stop, part number M630302. It is a direct-fit replacement for the 2004-2009 Toyota Sienna with all engines. Dorman precision-engineered it to match the original master cylinder's design, function and performance on the listed applications.
The master cylinder converts force from the brake pedal into hydraulic pressure that feeds the brake lines. If a leaking or internally worn master cylinder is behind a spongy or sinking pedal, this new unit replaces it.
Specifications: 0.75-inch bore · 2 outlets · rearward outlet size M10 x 1.0 · secondary outlet thread diameter M10 x 1.0 · primary outlet thread pitch 1 mm · material: aluminum. Country of origin: China.
For a 2004-2009 Toyota Sienna master cylinder replacement, the package contains the master cylinder only. The reservoir, sensor and mounting hardware are not included. Consult the vehicle service information for three things: transferring or replacing the original reservoir and any sensor, the correct fasteners and whether they may be reused, and the bleeding procedure.
Interchange: 100-2824 · 13-3278 · 11-3277 · 11-3278 · 11-3466 · 11-4296 · 130.44825 · 355-76166
1002824 · 133278 · 113277 · 113278 · 113466 · 114296 · 13044825 · 35576166 · 14077 · NM55338 · MC390870 · 4720708010 · 4720708011 · 4720708020 · 4720745020 · F142634 · MC142634
This part cross-references / interchanges with the following part numbers:
Is this the right 2005 Toyota Sienna master cylinder?
Yes. Dorman M630302 is a direct-fit replacement for the 2004-2009 Toyota Sienna with all engines, which covers the 2005 model year.
Does it come with a reservoir?
No. Only the master cylinder is included, with no reservoir, sensor or mounting hardware. Consult the service information on transferring the reservoir, the correct fasteners, and whether they may be reused.
What is this master cylinder made of?
The master cylinder is aluminum. All of its rubber components use a high-quality EPDM compound that resists glycol-based brake fluid.
What are signs a master cylinder may need replacing?
Common signs include a spongy or slowly sinking brake pedal and fluid leaking around the unit. These symptoms can have other causes, so diagnose the brake system before replacing parts.
What are the bore and outlet specifications?
It has a 0.75-inch bore and two outlets. The rearward outlet size is M10 x 1.0, the secondary outlet thread diameter is M10 x 1.0, and the primary outlet thread pitch is 1 mm.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.