Dorman - First Stop Brake Master Cylinder P/N:M630542
Dorman M630527 brake master cylinder for the 2006-2009 Ford Fusion and other vehicles turns pedal force into hydraulic pressure for the brakes. This Dorman brake master cylinder replaces a cylinder that leaks or no longer builds pedal pressure.
A sinking or soft brake pedal, or brake fluid wetting the cylinder body, can mean a worn master cylinder. With the engine off, check the cylinder body and the reservoir level by eye; a leak elsewhere in the brake system can also lower the pedal, so find the cause before replacing the cylinder.
This brake master cylinder fits the 2006-2009 Ford Fusion, the 2007-2009 Lincoln MKZ and the 2006-2009 Mercury Milan, plus other vehicles. Open the "Vehicles it fits" section and look up your exact model and engine.
Fit and size
Build and materials
One master cylinder; each vehicle takes one. A reservoir, mounting hardware and a sensor are not included, and the old mounting hardware may not be reusable, so plan on new pieces.
Interchange: 100-2198 · 13-3261 · 10-3261 · 130.61130 · 130.61141 · 131.61130 · 355-54092 · 355-54103 · BRMC-135
6E5Z2140BA · 9E5Z2140C · M4149 · NM4149 · NM55413 · GNYB4340Z · MC391069 · F143116 · MC143116
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Dorman M630527 a 2006-2009 Ford Fusion master cylinder?
Yes, Dorman M630527 fits the 2006-2009 Ford Fusion; for other cars, open the "Vehicles it fits" section and check your exact model and engine.
Does this Dorman master cylinder come with a reservoir or mounting hardware?
No. Dorman M630527 is the master cylinder only; the reservoir, mounting hardware and sensor are not included.
What are the outlet thread sizes on this brake master cylinder?
The rearward outlet and the secondary outlet thread are both M10 x 1.0, and the primary outlet thread pitch is 1 mm. The bore diameter is 0.875 in.
Which brake fluid are the rubber parts in this master cylinder made for?
All rubber components are made of EPDM compound, which resists glycol-based brake fluid. The cylinder housing is aluminum.
Can a leaking master cylinder make the brake pedal sink?
Yes, it can; a leaking or worn master cylinder can let the pedal sink or feel soft, though other brake parts can too. Have the brakes inspected promptly instead of driving on them.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.