Dorman - First Stop Disc Brake Caliper Repair Kit P/N:D670191
$24.99
(You save)
Reseal a leaking or sticking brake caliper with the Dorman - First Stop Disc Brake Caliper Repair Kit D670191. It drops in as a direct-fit replacement for the listed applications — the 2013-2014 Chrysler 200, 2007-2018 Chrysler 300, 2013-2014 Dodge Avenger, 2009-2016 Dodge Challenger, 2007-2018 Dodge Charger, and 2008-2009 Pontiac G8 (All engines) — and the catalog lists it for both front and rear caliper positions.
Kit contents: 2 piston seals and 2 piston boots, molded in black EPDM rubber, to replace the worn sealing components inside the caliper.
Fit specs: sized for a 57.99 mm piston bore; piston seal outside diameter 1.948 in; piston boot 58 mm outside diameter, 33.4 mm inside diameter, 8.6 mm length, and 0.7 mm material thickness.
Standard-replacement grade: made from quality components for reliable performance and a long service life.
Please note: installation hardware, bolts, pins, and caliper grease are not included — consult the vehicle service information for the correct fasteners and lubricant.
If torn or leaking original seals and boots are causing fluid seepage or a sticking piston, this kit supplies the parts to rebuild the caliper. Backed by Dorman's U.S. product-support team and over a century of automotive experience. Country of origin: China.
Interchange: 41566K · 41280 · WK2887. Manufacturer part number D670191.
This part cross-references / interchanges with the following part numbers:
41566K, 41280, WK2887
Frequently Asked Questions
What's included in this caliper repair kit?
It contains 2 EPDM rubber piston seals and 2 black EPDM rubber piston boots. Installation hardware, bolts, pins, and caliper grease are not included.
Which vehicles does D670191 fit?
It's a direct-fit for the 2013-2014 Chrysler 200, 2007-2018 Chrysler 300, 2013-2014 Dodge Avenger, 2009-2016 Dodge Challenger, 2007-2018 Dodge Charger, and 2008-2009 Pontiac G8. See the Buyer's Guide tab for the full list.
Does this kit fit front or rear calipers?
The catalog lists this repair kit for both front and rear caliper positions on the listed applications.
What bore size does this kit fit?
It's sized for a 57.99 mm caliper piston bore, with a piston boot outside diameter of 58 mm and a piston seal outside diameter of 1.948 in.
When might I need this repair kit?
If the caliper's original seals or boots are torn or leaking — causing brake fluid seepage or a sticking piston — this kit replaces those wear components. Diagnose the cause before rebuilding.
This disc brake caliper repair kit is designed to match the original components required to repair the caliper and restore proper operation of disc brakes on specified vehicles. Made of quality...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
