Dorman - First Stop Drum Brake Wheel Cylinder Kit P/N:351560
Repair a worn drum brake wheel cylinder rather than replacing the whole unit with the Dorman - First Stop Drum Brake Wheel Cylinder Repair Kit, part number 35492. It fits many classic Volkswagen models, among them the 1958-1978 Volkswagen Beetle and the 1971-1972 and 1976-1978 Volkswagen Super Beetle. See the "Vehicles it fits" section for the full list.
In a drum brake, the wheel cylinder uses hydraulic pressure from the master cylinder to push the brake shoes outward against the drum. The components in this kit are designed to match the original parts required to repair that cylinder on the listed applications. The catalog lists it for the front left, front right, rear left and rear right wheel positions.
If a leaking or sticking wheel cylinder is the cause of a soft pedal or brake pull, this kit supplies the parts to repair it. Inspect the cylinder bore before reassembly. Follow the vehicle service information, including bleeding the brakes afterward.
Interchange: 85-94111 · KW-20111 · 071-7322 · 071-7323 · 144.33111
8594111 · KW20111 · 0717322 · 0717323 · 14433111 · K922594 · 66789 · WK93124 · 113698293 · F93124
This part cross-references / interchanges with the following part numbers:
What does a drum brake wheel cylinder repair kit do?
It supplies the components needed to repair a drum brake wheel cylinder, as an alternative to replacing the whole cylinder. The wheel cylinder uses hydraulic pressure to push the brake shoes against the drum.
Which vehicles does Dorman 35492 fit?
It fits many classic Volkswagen models, including the 1958-1978 Volkswagen Beetle and the 1971-1972 and 1976-1978 Volkswagen Super Beetle. Check the "Vehicles it fits" section for your vehicle.
What wheel positions is this kit listed for?
The catalog lists it for the front left, front right, rear left and rear right wheel positions on the listed applications.
What are signs a wheel cylinder may need repair?
Common signs include brake fluid leaking at the drum or backing plate, a soft or low pedal, or the vehicle pulling to one side while braking. Diagnose the cause before replacing parts.
Is anything special needed during installation?
Inspect the cylinder bore before reassembly, because a pitted or scored bore may call for a new cylinder. Then bleed the brakes and follow the vehicle service information.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.