Help your drum brakes apply with steady hydraulic force using the Dorman drum brake wheel cylinder, part number W14522 from the First Stop line. It turns hydraulic pressure from the master cylinder into the force that pushes the brake shoes against the drum. It fits many vehicles, among them the 1998-2009 Ford F-250, 1998-2009 Ford F-350 and 1967-1971 Dodge P200 Van, and it is cataloged for both the rear left and rear right positions. See the Buyer's Guide tab for the full list.
Each unit is manufactured and tested for quality assurance.
- Direct replacement: engineered to match the original cylinder's fit, function and performance on particular vehicles.
- EPDM rubber cups and boots: built with high-quality EPDM rubber cups and boots.
- Surface-tested bores: the cylinder bores are surface-tested to give the pressure cups an optimum sealing surface.
- Cost-effective service step: Dorman points to replacing the wheel cylinder during a drum brake service as a fast, dependable way to help maintain brake performance.
A wheel cylinder may need replacing if brake fluid seeps at the backing plate or inside the drum, if the pedal feels soft or low, or if the brakes pull or grab. If a leaking or sticking cylinder is the cause, W14522 replaces it. We recommend replacing both rear cylinders together for balanced braking, then bleeding the brake system as the vehicle service information directs.
Interchange: 101-1686 · 134.68002 · 135.68002 · 375-40032
1011686 · 13468002 · 13568002 · 37540032 · 18E15 · W906078 · 33078 · 1791232 · WC251600 · 1D2261A · 2358854 · 5461470 · 391075C91 · WC14522 · F14522
This part cross-references / interchanges with the following part numbers:
18E15, W906078, 101-1686, 33078, 134.68002, 135.68002, 1791232, WC251600, 375-40032, 1D2261A, 2358854, 5461470, 391075C91, WC14522, F14522
