Dorman - First Stop Drum Brake Wheel Cylinder P/N:W37970
Help keep your rear drum brakes working as designed with this Dorman drum brake wheel cylinder, part number W37418 from the Dorman - First Stop line. It uses hydraulic pressure from the master cylinder to push the rear brake shoes out against the drum. It fits many vehicles, among them the 1985-1989 Subaru DL, 1990-1994 Subaru Loyale and 1985-1989 Subaru GL-10. See the "Vehicles it fits" section for the full list and engine details.
This direct-replacement rear wheel cylinder was engineered specifically to match the original unit's fit, function and performance on the listed applications. Dorman builds and tests each one for quality assurance.
A leaking wheel cylinder may leave brake fluid inside the drum or on the backing plate. It may also cause a soft pedal or uneven braking. If a worn wheel cylinder is the cause, this unit replaces it. Diagnose the brake system first, then bleed the brakes and follow the vehicle service information after installation.
Interchange: 784-18003 · 84-18003 · 101-1313 · W-55003 · 072-5473 · 134.47003 · 135.47003 · 375-13003
18E157 · W906461 · 33845 · 33924 · WC13924 · WC37418 · 25177GA360 · 625200470 · F116976 · WC116976 · 78418003 · 8418003 · 1011313 · W55003 · 0725473 · 13447003 · 13547003 · 37513003
This part cross-references / interchanges with the following part numbers:
What does a drum brake wheel cylinder do?
It turns hydraulic pressure from the master cylinder into force that pushes the brake shoes against the drum. Dorman W37418 is a rear wheel cylinder for the listed applications.
Which vehicles does the Dorman W37418 fit?
It fits many Subaru models, including the 1985-1989 Subaru DL, 1990-1994 Subaru Loyale and 1985-1989 Subaru GL-10. See the "Vehicles it fits" section for the full list.
What are the cups and boots made of?
The cups and boots on this wheel cylinder are made from high-quality EPDM rubber. The bores are surface-tested to give the pressure cups a proper sealing surface.
What are signs a wheel cylinder may need replacing?
Brake fluid inside the drum or on the backing plate, a soft or low pedal, and uneven braking can be signs. Other brake parts can cause similar symptoms, so diagnose the cause first.
Should I replace the wheel cylinder during a drum brake service?
Dorman describes replacing the cylinder during a drum brake service as a cost-effective step. After installation, bleed the brakes and follow the vehicle service information.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.