Turn hydraulic pressure into shoe-spreading force at the drum with the Dorman drum brake wheel cylinder W610012 from the First Stop line. It is a direct-fit replacement for the rear right position on the 2002-2005 Kia Sedona. When you press the pedal, fluid pressure moves the cylinder's pistons, which push the brake shoes out against the drum. See the "Vehicles it fits" section for full application details.
Dorman engineered this cylinder to match the original part's fit, function and performance on the listed application, and it is manufactured and tested for quality assurance.
- Ideal replacement: Designed as a direct match for the original drum brake wheel cylinder on the listed vehicle.
- Cost-effective repair: Replacing the cylinder while the drum brakes are already apart is a quick, dependable way to help maintain brake performance.
- Quality materials: Built with EPDM rubber cups and boots.
- Professionally tested: The bores are surface-tested for an optimum sealing surface for the pressure cups.
Signs a wheel cylinder may need replacing include brake fluid seeping inside the drum or at the backing plate, wet or contaminated brake shoes, a soft or sinking pedal, or the vehicle pulling to one side when braking. Diagnose the cause before replacing parts, and bleed the brake system according to the vehicle service information after installation.
Interchange: 101-1345 · 072-9558 · 134.50004 · 135.50004 · 375-21003
1011345 · 0729558 · 13450004 · 13550004 · 37521003 · W906829 · 34241 · WC252890 · WC256280 · 0K56B26610 · WC370118 · F140859 · WC140859
This part cross-references / interchanges with the following part numbers:
W906829, 101-1345, 072-9558, 34241, 134.50004, 135.50004, WC252890, WC256280, 375-21003, 0K56B26610, WC370118, F140859, WC140859
Frequently Asked Questions
Does this Dorman wheel cylinder fit the 2002-2005 Kia Sedona?
Yes. W610012 is a direct-fit replacement for the rear right drum brake wheel cylinder on the 2002-2005 Kia Sedona. Check the "Vehicles it fits" section for full application details.
What does a drum brake wheel cylinder do?
It turns hydraulic pressure from the brake pedal into mechanical force. Its pistons push the brake shoes outward against the drum to slow the wheel.
Which position does this wheel cylinder install in?
This unit is cataloged for the rear right position on the listed application.
What are the signs a wheel cylinder may need replacing?
Look for brake fluid seeping inside the drum, wet or contaminated shoes, a soft or sinking pedal, or pulling to one side when braking. Diagnose the cause before replacing parts.
What materials and testing go into this wheel cylinder?
It uses EPDM rubber cups and boots. Its bores are surface-tested for an optimum sealing surface for the pressure cups, and it is manufactured and tested for quality assurance.
