Dorman - First Stop Drum Brake Wheel Cylinder P/N:W610058
$32.99
(You save)
Keep your rear drum brakes responding with a firm, even pedal with the Dorman - First Stop Drum Brake Wheel Cylinder W610058. This rear wheel cylinder uses hydraulic pressure from the brake line to push the brake shoes outward against the drum. It drops in as a direct-fit replacement across select Mitsubishi models — the 2012, 2014 and 2016-2017 i-MiEV; the 2002-2010 and 2012-2016 Lancer; the 2016-2023 Mirage; and the 2017-2023 Mirage G4 (engine: All). See the Buyer's Guide tab for the full application list.
Bore & body: cast iron construction with a 0.75 in inside-diameter bore that is surface-tested to provide an optimum sealing surface for the pressure cups.
EPDM seals: made with high-quality EPDM rubber cups and boots for long-lasting performance.
Bleeder screw included: ships with a bleeder screw; the bleeder screw cap is not included.
Direct-fit build: engineered to replicate the original wheel cylinder's fit, function and performance on the listed vehicles, then manufactured and tested for quality assurance.
The inlet uses an M10 x 1.0 thread (10 mm thread diameter, 1.0 pitch). Quantity varies by application: most listed vehicles use two (one per rear wheel), while the 2020-2023 Mirage and 2020-2023 Mirage G4 use one. This listing is for a single cylinder (package contents: 1) — where two are used, replace both sides together as a matched pair for balanced braking. Country of origin: China.
It uses hydraulic pressure from the brake line to push the rear drum brake shoes outward against the drum. Worn cups can leak fluid and cause a soft or sinking pedal, signs it may need replacing.
Does it come with a bleeder screw?
Yes, a bleeder screw is included. The bleeder screw cap is not included.
How many do I need for my vehicle?
Quantity varies by application. Most listed vehicles use two (one per rear wheel); the 2020-2023 Mirage and Mirage G4 use one. This listing is for a single cylinder.
Which vehicles does W610058 fit?
Select Mitsubishi models: 2012, 2014 and 2016-2017 i-MiEV; 2002-2010 and 2012-2016 Lancer; 2016-2023 Mirage; and 2017-2023 Mirage G4. See the Buyer's Guide tab for the full list.
What are the bore and inlet specs?
It has a 0.75 in inside-diameter cast iron bore and an M10 x 1.0 inlet thread (10 mm thread diameter, 1.0 pitch).
Write a Review
Dorman
Dorman - First Stop Drum Brake Wheel Cylinder P/N:W610058
Bring firm, even drum braking back to your classic Mopar with the Dorman - First Stop Drum Brake Wheel Cylinder (W10581). This hydraulic wheel cylinder uses brake-fluid pressure to push its...
Turn brake-fluid pressure into the force that expands your brake shoes with the Dorman First Stop Drum Brake Wheel Cylinder W15306 — the rear hydraulic actuator that pushes its cups and pistons...
Push the brake shoes firmly against the drum with the Dorman - First Stop Drum Brake Wheel Cylinder W14206. This front-left drum brake wheel cylinder receives pressurized brake fluid from the...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
