Help your parking brake hold the car in place with this Dorman parking brake cable, part number C660734 from Dorman - First Stop. It is a direct-fit replacement for the rear right cable on the 2003-2007 Honda Accord. See the "Vehicles it fits" section for the full application details.
The cable carries the pull from the parking brake control to the rear brake, applying it to help keep the vehicle stationary when parked. Dorman engineered and tested this cable to fit, function and perform like the original brake cable on the listed applications. It pairs a corrosion-resistant design with durable materials for added strength.
- Quality design: the inner cables are sheathed and lubricated for improved durability.
- Protective construction: the flexible casings are fully covered with conduit to help prevent wear on the interior cables.
- Tough materials: zinc-plated fittings help resist corrosion.
A worn parking brake cable on the 2003-2007 Honda Accord may show several signs: a parking brake that no longer holds, extra travel at the lever or pedal, a brake that drags or will not release, or a frayed or corroded cable. If the cable is the cause, this Dorman brake cable replaces it. Inspect the opposite side as well, and consider replacing both cables if that side shows similar wear.
Interchange: 27170 · 47510SDAA52 · 47510SDCA51 · 47510SDCA52 · 47510SDCA53 · BC96785 · BC96833
This part cross-references / interchanges with the following part numbers:
27170, 47510SDAA52, 47510SDCA51, 47510SDCA52, 47510SDCA53, BC96785, BC96833
Frequently Asked Questions
What does the C660734 parking brake cable do?
It carries the pull from the parking brake control to the rear brake. That applies the brake and helps hold the vehicle stationary when parked.
Which vehicle and position does this cable fit?
It is a direct-fit replacement for the rear right parking brake cable on the 2003-2007 Honda Accord. See the "Vehicles it fits" section for the full application details.
How is the cable protected against wear and corrosion?
The inner cables are sheathed and lubricated, and the flexible casings are fully covered with conduit. The fittings are zinc-plated to help resist corrosion.
What are signs a parking brake cable may need replacing?
Signs include a parking brake that does not hold, extra travel at the lever or pedal, a brake that drags or will not release, or a frayed or corroded cable. Diagnose the cause before replacing.
How should the cable be installed and adjusted?
Follow the vehicle service information for routing, attachment and parking brake adjustment. After installation, confirm the parking brake applies and releases properly before driving.
