Dorman 242-6058 front left bumper bracket for the 2005-2011 Freightliner Century Class supports the bumper at the front left corner. It replaces an original bracket that is damaged or missing, and it is made to match that bracket's fit, function and materials.
- Dorman HD Solutions heavy duty bumper bracket
- Steel body, 0.12 in thick, with a black satin finish
- Ten 0.25 in mounting holes for bolt-on attachment
- Try-on tested on the vehicle for a trouble-free installation
Quick facts
- Part: Dorman 242-6058 bumper bracket
- Fits: 2005-2011 Freightliner Century Class
- Position: Front left
- Material: Steel
- Condition: New
A loose or sagging bumper, a visible crack or bend in the bracket, or a bracket that is missing can mean it needs replacing. Before ordering, look over the bracket and its mounting points with the engine off, and note whether the damage came from an impact or a worn bolt hole, since the cause decides what else needs repair.
Fits
This bracket fits the 2005-2011 Freightliner Century Class. This listing is one bracket for the front left; the front right is a separate part, and the two sides are normally replaced at the same time.
Specifications
Fit and size
- Position: front left
- Quantity per vehicle: 1 (front left)
- Length: 23 in
- Width: 30 in
- Material thickness: 0.12 in
- Mounting holes: 10, 0.25 in diameter
- Attachment method: bolt on
Build and materials
- Material: steel
- Finish: black satin
- Mounting hardware: not included
- Condition: new
- Country of origin: Taiwan
In the box
One bumper bracket, and the front left takes one. Mounting hardware is not included, so plan on new bolts, since the old ones may not be reusable.
Interchange: 564.4669 · 564.46690
A2127642002
This part cross-references / interchanges with the following part numbers:
564.4669, 564.46690, A2127642002
Frequently Asked Questions
Does the Dorman 242-6058 bumper bracket fit the 2005-2011 Freightliner Century Class?
Yes. Dorman 242-6058 is a front left bumper bracket for the 2005-2011 Freightliner Century Class. The front right side is a separate part.
Does the Dorman 242-6058 bumper bracket come with bolts?
No. This listing is one steel bumper bracket with no mounting hardware, so plan on new bolts. Dorman 242-6058 has ten 0.25 in mounting holes.
How thick is the steel on this heavy duty bumper bracket?
The steel is 0.12 in thick. The bracket measures 23 in by 30 in and attaches with bolts through its ten mounting holes.
How can I tell if my front left bumper bracket is damaged?
A cracked or bent bracket, a loose or sagging bumper, or visible rust-through can mean it needs replacing. Look with the engine off and the vehicle parked.
Was this Dorman HD Solutions bumper bracket tested for fit?
Yes. This bracket has undergone try-on testing on the vehicle to confirm a quality fit for a trouble-free installation.
