Dorman 927-933 catalytic converter anti-theft shield for the 2010-2015 Toyota Prius 4-cylinder 1.8L shields the catalytic converter as a retrofit theft deterrent. Catalytic converters carry high scrap value, and thieves often damage the parts around them during a theft.
- Dorman OE Solutions line shield designed as an unobtrusive deterrent against converter theft
- Precision-cut aluminum shield that does not sit below the vehicle's body line
- Corrosion-resistant security star hardware is included with the shield
- Quick removal with the included service tool once the first install is done
Quick facts
- Part: Dorman 927-933 catalytic converter anti-theft shield
- Fits: 2010-2015 Toyota Prius 4-cylinder 1.8L
- Material: Aluminum, steel
- Condition: New
A shield is fitted before a theft and does not replace a converter that is already gone. If a theft has already happened, a shop can inspect the exhaust and nearby undercar parts, which thieves often damage.
Fits
It fits the 2010-2015 Toyota Prius 4-cylinder 1.8L, and the car takes one set made up of a front shield and a rear shield.
Specifications
Fit and size
- Quantity per vehicle: 1 set (front shield and rear shield)
- Thickness: 2 mm
- Length: 245 mm and 452 mm
- Width: 520 mm and 522 mm
Build and materials
- Material: aluminum and steel
- Hardware: 12 screws, 12 rivet nuts, 12 washers
- Drilling required: yes
- Condition: New
- Country of origin: India
In the box
One front shield, one rear shield, one rivet nut tool, one security star bit and a hardware assortment of 12 screws, 12 rivet nuts and 12 washers.
Installation notes
- No welding or special tools are needed.
- Drilling is required.
Interchange: CAT-SCR-3
Frequently Asked Questions
Does the Dorman 927-933 shield fit the 2010-2015 Toyota Prius 4-cylinder 1.8L?
Yes. Dorman 927-933 is listed for the 2010-2015 Toyota Prius 4-cylinder 1.8L, and that car takes one set of front and rear shields.
Does the Dorman 927-933 converter shield come with its own tools?
Yes. Dorman 927-933 includes a rivet nut tool and a security star bit, plus 12 screws, 12 rivet nuts and 12 washers.
What is this converter shield made of?
The shield is made of aluminum and steel and is 2 mm thick. Its security star hardware is corrosion-resistant.
Do I need to drill or weld to install this anti-theft shield?
No welding is needed, but drilling is required. The kit includes the rivet nut tool and security star bit for the job.
Can this converter shield be removed later for service?
Yes. After the first install, the included service tool lets you remove the shield quickly.
