Dorman 925-066 front door hinge for the 1980-1997 Ford F-250 and other vehicles connects the door to the door frame. This Dorman door hinge is designed to replace a rusted, failed or damaged one and help restore proper door operation.
- Part of the Dorman OE Solutions line
- Designed and manufactured to strict specifications for reliable performance
- Carbon steel hinge with a zinc and clear chromate finish
- One-piece, bolt-on construction with a fixed pin
Quick facts
- Part: Dorman 925-066 door hinge
- Fits: 1980-1997 Ford F-250 and other vehicles
- Position: Front right lower, front left upper
- Material: Carbon steel
- Condition: New
A door that sags, drags at the latch or is hard to close can mean the hinge is worn, and rust or play at the pin can show the same. Loose bolts or a damaged door frame can cause sagging too, so look over the hinge, its bolts and the frame by eye before you replace it.
Fits
It also fits the 1980-1996 Ford F-150 and the 1983-1992 Ford Ranger, among many other vehicles. This listing is one hinge, and each application takes one; any other hinge on the door is ordered separately.
Specifications
Fit and size
- Position: front right lower, front left upper
- Quantity per application: 1
- Assembled length: 145 mm
- Assembled height: 156 mm
- Assembled width: 177 mm
- Flange 1 mount hole diameter: 9.5 mm, 3 holes
- Flange 2 mount hole diameter: 9.7 mm, 2 holes
- Pin diameter: 0.34 in
Build and materials
- Material: carbon steel
- Finish: zinc and clear chromate
- Configuration: one piece
- Pin attachment: fixed
- Attachment method: bolt on
- Condition: new
- Country of origin: Taiwan
In the box
One door hinge with its pin and bushings. Mounting hardware is not included, so plan on new bolts.
Interchange: E8TZ1522810A
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Will this Ford F-150 door hinge fit a 1980-1996 model?
Yes. Dorman 925-066 is listed for the 1980-1996 Ford F-150, and each truck takes one. Owners of other models can look theirs up in the "Vehicles it fits" section on this page.
Do Dorman hinges like this one include mounting bolts?
No. Dorman 925-066 is one hinge with its pin and bushings; mounting hardware is not included, so plan on new bolts.
What size are the mounting holes and pin on this door hinge?
One flange has three 9.5 mm holes and the other has two 9.7 mm holes. The fixed pin is 0.34 in in diameter.
How can I tell if a door hinge is worn out?
A door that sags, drags at the latch or is hard to close can mean hinge wear. With the door open, rust, cracks or play at the pin are visible by eye.
What is this door hinge made of, and how is it finished?
Dorman 925-066 is carbon steel with a zinc and clear chromate finish. It is a one-piece hinge with a fixed pin.
