Dorman 935-920 front drive shaft coupler for the 1968-1971 Mercedes-Benz 280S and other vehicles is the flexible link in the drive shaft that carries torque. This Dorman drive shaft coupler is a direct replacement for an original coupler that has failed from wear or collision damage.
- Steel and rubber construction for flexibility and durability
- Six bolt holes, 14.15 mm each
- Bolt pattern diameter of 84.75 mm
- Sleeve length of 23.5 mm
Quick facts
- Part: Dorman 935-920 drive shaft coupler
- Fits: 1968-1971 Mercedes-Benz 280S and other vehicles
- Position: Front
- Material: Steel and rubber
- Condition: New
A worn drive shaft coupler can show up as vibration, a clunk when you accelerate or let off, or torn rubber that a shop can spot on inspection. Before you replace it, rule out other driveline causes of vibration, such as worn joints or shaft balance, because they can feel much alike.
Fits
Besides the 1968-1971 Mercedes-Benz 280S, it is listed for a wide range of Mercedes-Benz models, including the 1968-1971 Mercedes-Benz 280SE and 280SEL. If your car isn't named here, look up its model and year in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 1
- Sleeve length: 23.5 mm
- Bolt pattern diameter: 84.75 mm
- Bolt holes: 6, 14.15 mm each
Build and materials
- Material: Steel, rubber
- Attachment method: Bolts
- Grade: Standard replacement
- Condition: New
- Country of origin: Germany
In the box
One drive shaft coupler, and the 1968-1971 Mercedes-Benz 280S takes one. Mounting hardware is not included, so plan on new bolts, since the old ones may not be reusable.
Interchange: 1084100115
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is the Dorman 935-920 drive shaft coupler right for a 1968-1971 Mercedes-Benz 280S?
Yes. The Dorman 935-920 front drive shaft coupler is listed for the 1968-1971 Mercedes-Benz 280S.
Are bolts included with the 935-920 drive shaft coupler?
No. The package holds one drive shaft coupler and no mounting hardware, so plan on buying new bolts.
What is the bolt pattern on this front drive shaft coupler?
The bolt pattern diameter is 84.75 mm, with six bolt holes of 14.15 mm each. The sleeve length is 23.5 mm.
Could a clunk when letting off the gas mean a worn drive shaft coupler?
It can, but other driveline parts can cause a clunk too. Torn or cracked rubber on the coupler is one sign a shop can look for.
Does the Dorman 935-920 replace number 1084100115?
Yes. 1084100115 is listed as an interchange number for the Dorman 935-920 drive shaft coupler.
