Dorman 626-803 lower coolant overflow hose for the 2013-2016 Ford Escape 4-cylinder 2.0L carries overflow coolant away from the cooling system. Original assemblies often crack at the plastic connectors; this engine coolant overflow hose is built to avoid that failure.
- Dorman OE Solutions line, sold as an OE FIX replacement
- Aluminum connectors for added durability
- Branched molded assembly with two branches
- Quick-disconnect fitting on end 2 and hose connections on ends 1 and 3
Quick facts
- Part: Dorman 626-803 coolant overflow hose
- Also called: engine coolant overflow hose
- Fits: 2013-2016 Ford Escape 4-cylinder 2.0L
- Position: Lower
- Material: Plastic, rubber
- Condition: New
Coolant stains near the hose, cracks at a connector or a coolant level that keeps dropping can mean the hose needs replacing. Before you replace it, rule out a loose reservoir cap and a leak elsewhere in the cooling system, since a falling level has more than one possible source. Check the level only when the engine is cool.
Fits
It is a direct-fit replacement for the 2013-2016 Ford Escape 4-cylinder 2.0L, which takes one.
Specifications
Fit and size
- Position: Lower
- Quantity per vehicle: 1
- Length: 81.25 in
- Inside diameter: 0.75 in
- Outside diameter: 0.91 in
- Thickness: 0.15 in
- End 1 diameters: 0.88 in inside, 1.15 in outside
- End 2 diameters: 0.75 in inside, 1.2 in outside
- End 3 diameters: 0.58 in inside, 0.86 in outside
- Branches: 2
Build and materials
- Type: Branched molded assembly
- Material: Plastic, rubber
- Connectors: Aluminum
- Condition: New
- Country of origin: China
In the box
One coolant overflow hose. Clamps, a heat shield and a protective sleeve are not included, so plan on new clamps; the old ones may not be reusable.
Interchange: CV6Z8075AA
Frequently Asked Questions
Is the Dorman 626-803 coolant overflow hose right for the 2013-2016 Ford Escape 4-cylinder 2.0L?
Yes. Dorman 626-803 is a lower coolant overflow hose for the 2013-2016 Ford Escape 4-cylinder 2.0L, and that engine takes one.
Do I need to buy clamps separately for this coolant overflow hose?
Yes. Dorman 626-803 is one hose; clamps, a heat shield and a protective sleeve are not included, so have new clamps ready.
What are the connectors on this coolant overflow hose made of?
The connectors are aluminum, an upgrade over the plastic connectors that often crack on original assemblies. The hose itself is listed as plastic and rubber.
How long is this branched overflow hose and what are its ends?
It is 81.25 in long with a 0.75 in inside diameter. Ends 1 and 3 are hose connections and end 2 is a quick disconnect.
What can a failing coolant overflow hose look like?
Coolant stains near the hose, cracks at a connector or a coolant level that keeps dropping can mean it needs replacing. Look only with the engine off and cool; a shop can test for a leak you cannot find.
