Dorman 674-066 exhaust manifold catalytic converter for the 2010-2012 Ford Fusion 4-cylinder 2.5L and other vehicles collects exhaust gas from the cylinders and treats it in a catalytic converter built into the same piece.
- Dorman OE Solutions line
- One-piece stainless steel body that combines the exhaust manifold and the catalytic converter
- Ceramic substrate inside the converter body
- Inlet and outlet gaskets plus downpipe hardware in the kit
- Manufactured within strict tolerances
Quick facts
- Part: Dorman 674-066 exhaust manifold catalytic converter
- Also called: exhaust manifold with integrated catalytic converter
- Fits: 2010-2012 Ford Fusion 4-cylinder 2.5L and other vehicles
- Material: Stainless steel
- Condition: New
A ticking or hissing exhaust leak near the manifold, a rattle from inside the unit or a check engine light can mean the exhaust manifold catalytic converter is failing. Before you replace it, rule out a leaking gasket, a loose flange or a sensor fault with a shop test, since those can look similar from the driver's seat.
Fits
This part fits the 2010-2012 Ford Fusion 4-cylinder 2.5L, the 2011-2012 Lincoln MKZ 4-cylinder 2.5L and the 2010-2011 Mercury Milan 4-cylinder 2.5L, and each takes one. It is a direct replacement designed to fit and perform like the original equipment on these vehicles.
Specifications
Fit and size
- Quantity per vehicle: 1
- Overall length: 21 in
- Inlet inside diameter: 28 mm
- Outlet inside diameter: 28 mm
- Outlet outside diameter: 32 mm
- Inlet and outlet mounting holes: 9 each
- Sensor ports: 2
Build and materials
- Construction: one-piece
- Material: stainless steel
- Converter substrate: ceramic
- Inlet and outlet: flanged, round ports
- Emissions: not CARB compliant, not New York certified
- Condition: new
- Country of origin: United States
In the box
One exhaust manifold catalytic converter, one inlet gasket, one outlet gasket, six bolts, six washers, two nuts and two brackets. Clamps, hangers and inlet mounting hardware are not included, so plan on new fasteners for the inlet joint.
Interchange: AE5Z5G232A · 51785
Frequently Asked Questions
Will Dorman 674-066 work on a 2010-2011 Mercury Milan 4-cylinder 2.5L?
Yes. Dorman 674-066 fits the 2010-2011 Mercury Milan 4-cylinder 2.5L, and that car takes one.
Is the Dorman exhaust manifold with integrated catalytic converter CARB compliant?
No. Dorman 674-066 is not CARB compliant and is not New York certified.
What hardware comes with this exhaust manifold catalytic converter?
Six bolts, six washers, two nuts, two brackets, an inlet gasket and an outlet gasket. Clamps, hangers and inlet mounting hardware are not included.
What size are the inlet and outlet openings on this exhaust manifold catalytic converter?
The inlet and outlet inside diameters are both 28 mm, and the outlet outside diameter is 32 mm. Both ends are flanged.
Is the Dorman 674-066 stainless steel with a ceramic substrate?
Yes. The converter body is stainless steel and the substrate inside it is ceramic.
