Dorman - OE Solutions Exhaust Manifold with Integrated Catalytic Converter P/N:674-891
Dorman 674-843 right exhaust manifold catalytic converter for the 2008-2012 Nissan Pathfinder V8 5.6L and other vehicles joins the exhaust manifold and the converter in one piece. It gathers exhaust from the cylinders and runs it through the catalyst on its way to the exhaust pipe.
Exhaust leak noise, a rattle from the converter or an emissions warning light can mean this unit is worn, though an oxygen sensor or a leaking downpipe gasket can be behind the same signs, so track down the cause first.
The vehicles it fits include the 2008-2012 Nissan Pathfinder V8 5.6L, the 2012-2016 Nissan NV2500 V8 5.6L and the 2012-2016 Nissan NV3500 V8 5.6L. It is a direct replacement made to match the original equipment on these vehicles. If your truck or SUV is not named here, look for it in the "Vehicles it fits" section.
Fit and size
Build and materials
One exhaust manifold catalytic converter with one inlet gasket, one outlet gasket, four bolts, four washers, two nuts and two studs. Clamps, hangers and inlet mounting hardware are not included, so plan on new inlet hardware, since the old pieces may not be reusable. This listing is one right-side unit; this side takes one, and the left side is a separate part ordered on its own.
Does Dorman 674-843 fit the 2012-2016 Nissan NV2500 V8 5.6L?
Yes. Dorman 674-843 is a right-side exhaust manifold catalytic converter listed for the 2012-2016 Nissan NV2500 V8 5.6L, and for the 2012-2016 Nissan NV3500 V8 5.6L as well.
Is the Dorman exhaust manifold with integrated catalytic converter CARB compliant?
No. Dorman 674-843 is not CARB certified. It is a standard replacement grade unit.
Do the gaskets and bolts come with this right exhaust manifold catalytic converter?
Yes. The kit has an inlet gasket, an outlet gasket, four bolts, four washers, two nuts and two studs. Clamps, hangers and inlet mounting hardware are not included.
What is this right exhaust manifold catalytic converter made of?
It is made of stainless steel. It has round inlet ports and two outlet mounting holes.
Is a rattle or exhaust noise a sign this exhaust manifold catalytic converter is worn?
It can be. A ticking or hissing exhaust noise, a rattle from the converter or an emissions warning light can be signs of wear. A shop can test the exhaust safely.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.