Dorman 904-156 fuel injector line for the 2007-2010 Chevrolet Express 2500 V8 6.6L and other vehicles carries fuel to the injector. It is a direct replacement made to match the original line on the specified vehicles, and is also known as a fuel injector feed line.
- Part of the Dorman OE Solutions line
- Material-hardening process so the line withstands high pressure during engine operation
- Rated for a maximum line pressure of 25000 PSI
- Steel line with steel fittings at both ends
Quick facts
- Part: Dorman 904-156 fuel injector line
- Fits: 2007-2010 Chevrolet Express 2500 V8 6.6L and other vehicles
- Position: Supply
- Material: Steel
- Condition: New
A fuel-smelling or damp line, wet fittings, cracks or a kink can mean the line is leaking, although hard starting or rough running can have other sources. With the engine off and cool, look over the line and its fittings for wetness or damage first; a shop can test the fuel system under pressure.
Fits
This fuel injector line suits the 2007-2010 Chevrolet Express 3500 V8 6.6L and the 2009-2010 Chevrolet Express 4500 V8 6.6L, along with other Chevrolet and GMC trucks and vans. If your truck or van is not named here, look up its year and engine in the "Vehicles it fits" section. This listing is one supply line, and the fitment lists one per vehicle.
Specifications
Fit and size
- Position: Supply
- Quantity per vehicle: 1
- Length: 4.5 in
- Outside diameter: 8 mm
- Inside diameter: 0.142 in
- Wall thickness: 0.087 in
- Inlet fitting: female, M14 x 1.5, metric coarse thread
- Outlet fitting: female, M18 x 1.5, metric coarse thread
Build and materials
- Material: Steel
- Fitting material: Steel
- Fittings: 2
- Maximum pressure: 25000 PSI
- Gauge port: No
- Condition: New
- Country of origin: China
In the box
One fuel injector line.
Installation notes
- The crushable seal on a fuel injector line is single-use, so the entire line is replaced to get a proper seal.
Interchange: 98006526
Frequently Asked Questions
Is the Dorman 904-156 the right fuel injector line for a 2009-2010 Chevrolet Express 4500 V8 6.6L?
Yes. The Dorman 904-156 fuel injector line is listed for the 2009-2010 Chevrolet Express 4500 V8 6.6L, and the fitment calls for one line per vehicle.
What fittings are on this fuel injector line?
The box holds one fuel injector line with a female fitting at each end: an M14 x 1.5 inlet and an M18 x 1.5 outlet, both metric coarse thread.
What pressure can the Dorman 904-156 fuel injector line handle?
The Dorman 904-156 fuel injector line has a maximum line pressure of 25000 PSI. The steel line goes through a material-hardening process so it holds up to high pressure while the engine runs.
Can I swap just the seal on a fuel injector line instead of the whole line?
No. Fuel injector lines use a one-time-use crushable seal, so the entire line is replaced for a proper seal. The Dorman 904-156 is a complete line.
Is 98006526 an interchange number for the Dorman 904-156?
Yes. 98006526 is listed as an interchange number for the Dorman 904-156 fuel injector line, so you can match it against that number.
