Dorman 692-251 fuel pump hanger for the 1992-1996 Ford F-150 6-cylinder 4.9L, V8 5.0L or 5.8L and other vehicles mounts the fuel sending unit in the tank. Also called a fuel pump hanger assembly, it is a replacement for an assembly that has failed due to moisture infiltration or collision damage.
- Part of the Dorman OE Solutions line
- 11-inch wiring harness with four wires and four male pin terminals
- Fuel tank pressure sensor included
- Two non-flanged inlets and three tube-type outlets
- Made of metal for durability
Quick facts
- Part: Dorman 692-251 fuel pump hanger
- Also called: fuel pump hanger assembly
- Fits: 1992-1996 Ford F-150 6-cylinder 4.9L, V8 5.0L or 5.8L and other vehicles
- Material: Metal
- Condition: New
A fuel gauge that reads wrong, a fuel smell near the tank or an engine that cranks but will not start can be signs this hanger is worn or damaged. A weak fuel pump can make an engine hard to start too, so these signs alone do not prove the hanger is the problem.
Fits
The 1992-1996 Ford F-150 6-cylinder 4.9L, V8 5.0L or 5.8L, the 1992-1996 Ford F-250 6-cylinder 4.9L, V8 5.0L, 5.8L, 7.3L or 7.5L and the 1992-1996 Ford F-350 6-cylinder 4.9L, the 1992-1997 F-350 V8 5.8L, 7.3L or 7.5L and the 1998 F-350 V8 5.0L all fit this hanger, along with other vehicles. The fitment calls for one hanger per vehicle. If your vehicle is not one of these, look up its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Length: 6.25 in
- Top mount diameter: 4.4 in
- Housing width: 1.97 in
- Wiring harness length: 11 in
- Inlet outside diameter: 0.38 in and 0.315 in
- Outlet outside diameter: 0.38 in and 0.315 in
Build and materials
- Material: Metal
- Gasket material: Rubber
- Fuel type: Gas
- Connector: circular, 4 male pin terminals
- Grade: Standard replacement
- Condition: New
- Country of origin: China
In the box
One sending unit, one lock ring and one gasket. The fuel pump, strainer and mounting hardware are not included, so plan on new fasteners.
Interchange: F4TZ9A407C · F6TZ9A407CA · F6TZ9A407CC · PFB3 · FG146A
This part cross-references / interchanges with the following part numbers:
F4TZ9A407C, F6TZ9A407CA, F6TZ9A407CC, PFB3, FG146A
Frequently Asked Questions
Is the Dorman 692-251 fuel pump hanger right for the 1992-1996 Ford F-250 V8 7.3L?
Yes. Dorman 692-251 fits the 1992-1996 Ford F-250 with the 6-cylinder 4.9L, V8 5.0L, 5.8L, 7.3L or 7.5L. For other vehicles, look in the "Vehicles it fits" section.
Does this fuel pump hanger come with the fuel pump?
No. Dorman 692-251 includes a sending unit, lock ring and gasket, but not the fuel pump, strainer or mounting hardware.
What size are the inlet and outlet tubes on this fuel pump hanger?
The inlets and the outlets each have outside diameters of 0.38 inch and 0.315 inch. There are two non-flanged inlets and three tube-type outlets.
What can a failing fuel sending unit on a hanger like this look like?
A fuel gauge that reads wrong, a fuel smell near the tank or hard starting can be signs. A shop can test the fuel system safely.
Does Dorman 692-251 replace number F6TZ9A407CA?
Yes. F6TZ9A407CA is on the Interchange line for Dorman 692-251, along with F4TZ9A407C, F6TZ9A407CC, PFB3 and FG146A.
