Dorman 602-092 front windshield wiper linkage for the 2007-2012 Nissan Versa passes motion from the wiper motor to the wiper arms. If a failed crank arm is why the blades stopped moving, this Dorman wiper linkage replaces it.
- Corrects a failed crank arm to restore wiper blade operation
- Reverse-engineered, application-specific design
- Two-piece configuration with a bracket
- Steel bushings
- Part of the Dorman OE Solutions line
Quick facts
- Part: Dorman 602-092 windshield wiper linkage
- Fits: 2007-2012 Nissan Versa
- Position: Front
- Material: Steel bushings
- Condition: New
Blades that stall partway, park in the wrong spot or stay still while the motor runs can mean the linkage has a problem, but a motor or wiring fault looks the same from the driver's seat. With the engine off, look for a broken crank arm or a loose joint before you replace anything.
Fits
It is a direct replacement for the 2007-2012 Nissan Versa, which takes one.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 1
- Length: 36 in
- Material thickness: 0.75 in
- Wiper arm pivot point diameter: 0.373 in
- Attachment method: Bolt on
- Rotation direction: Clockwise
Build and materials
- Configuration: Two piece
- Linkage frame or bracket: Bracket
- Bushing material: Steel
- Driver type: Mechanical
- Condition: New
- Country of origin: Vietnam
In the box
One windshield wiper linkage. Mounting hardware is not included, so plan on new bolts, since the old ones may not be reusable.
Interchange: 28840EM30A
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is the Dorman 602-092 front windshield wiper linkage right for the 2007-2012 Nissan Versa?
Yes. Dorman 602-092 is listed for the 2007-2012 Nissan Versa, and that car takes one linkage.
Does this windshield wiper linkage come with mounting bolts?
No. Dorman 602-092 comes as one linkage with no mounting hardware, so plan on new bolts.
How long is this front windshield wiper linkage and what pivot size does it have?
It is 36 inches long, with a 0.373 inch wiper arm pivot point diameter and 0.75 inch material thickness.
My wiper motor runs but the blades stay still. Could the linkage be the reason?
Yes, if the crank arm in the linkage has failed, the motor can run while the blades stay still. A shop can test the motor and linkage if you are unsure.
Does Dorman 602-092 replace number 28840EM30A?
Yes. 28840EM30A is listed as an interchange number for Dorman 602-092.
