Dorman SD87199RD front steering stabilizer for the 2011-2024 Ford F-250 Super Duty and other vehicles absorbs abrupt steering movements and impact energy. It is intended to take over when the factory stabilizer has failed.
- Part of the Dorman OE Solutions line
- Single-tube construction with foam cell damping, not gas charged
- Steel shaft and steel cylinder with a painted, corrosion-resistant finish
- Loop (eyelet) bushing at both the upper and lower mounts
- Travel of 298 mm between a 415 mm compressed length and a 713 mm extended length
Quick facts
- Part: Dorman SD87199RD steering stabilizer
- Also called: steering damper
- Fits: 2011-2024 Ford F-250 Super Duty and other vehicles
- Position: Front
- Material: Steel (shaft and cylinder)
- Condition: New
A loose feel in the steering wheel or a shake after bumps can mean a steering damper is worn, though worn tie rod ends or ball joints can be behind it too, so find the cause before replacing the part.
Fits
Besides the truck named above, this steering stabilizer is a direct-fit replacement for the 2011-2024 Ford F-350 Super Duty and the 2011-2024 Ford F-450 Super Duty. If your truck is not named here, look it up in the "Vehicles it fits" section. Each truck needs one stabilizer, and this listing is one.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 1
- Shaft (rod) diameter: 12.5 mm
- Body diameter: 48 mm
- Compressed length: 415 mm
- Extended length: 713 mm
- Travel length: 298 mm
Build and materials
- Construction: single tube, foam cell damping
- Gas charged: no; adjustable damping: no
- Shaft and cylinder material: steel
- Finish: painted
- Upper and lower mounts: loop (eyelet) bushing
- Boot: included
- Condition: New
- Country of origin: China
In the box
One steering stabilizer with its boot, one bolt and two nuts. A dust shield is not included.
Interchange: BC3Z3E651B · KC3Z3E651B · KC3Z3E651E · KC3Z3E651G
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
BC3Z3E651B, KC3Z3E651B, KC3Z3E651E, KC3Z3E651G
Frequently Asked Questions
Does a 2011-2024 Ford F-250 Super Duty take this steering stabilizer?
Yes. Dorman SD87199RD is a front steering stabilizer for the 2011-2024 Ford F-250 Super Duty. For other trucks, use the "Vehicles it fits" section.
What hardware comes with the Dorman SD87199RD steering stabilizer?
One steering stabilizer with its boot, one bolt and two nuts. A dust shield is not included.
Is the Dorman SD87199RD steering stabilizer gas charged?
No. It is a single-tube foam cell design with non-adjustable damping, a 12.5 mm steel shaft and a 48 mm body diameter.
How can I check the Dorman SD87199RD steering stabilizer for wear?
With the engine off, look for cracked eyelet bushings, a bent shaft or a visible leak at the body. A loose or shaky steering feel in normal driving is another sign.
How far does the Dorman SD87199RD steering stabilizer extend?
It measures 415 mm compressed and 713 mm extended, which gives 298 mm of travel.
